So the jimnys have the sierra lean too!
| auszookers.com https://auszookers.com/forum/ |
|
| JIMNY SHOCKS/SPRINGS. https://auszookers.com/forum/viewtopic.php?f=5&t=6688 |
Page 1 of 1 |
| Author: | BAZZOOK [ Thu Sep 17, 2009 2:02 pm ] |
| Post subject: | JIMNY SHOCKS/SPRINGS. |
JUST ORDERING SOME OME SHOCKS/SPRINGS. SUPPLIER NEEDS TO KNOW IF JIMNY IS JAPAN BUILD OR EUROPEAN. ID PLATE JUST SAYS SUZUKI MOTOR CO JAPAN. IS IT SAFE TO SAY IT'S JAPAN BUILD? |
|
| Author: | joeblow [ Thu Sep 17, 2009 2:05 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
if the build plate has jap than its jap. as far as i know the soft tops were spanish, and the hardtops japanese. |
|
| Author: | BAZZOOK [ Thu Sep 17, 2009 2:08 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
THANKS JOE. EUROPEANS HAVE DIFFERENT SPRING RATES EACH SIDE. GOING 40MM LIFT. |
|
| Author: | BlueSuzy [ Thu Sep 17, 2009 2:42 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
So the jimnys have the sierra lean too!
|
|
| Author: | joeblow [ Thu Sep 17, 2009 3:22 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
BlueSuzy wrote: So the jimnys have the sierra lean too!
haha....nope. its because they have diesels over there. |
|
| Author: | BlueSuzy [ Thu Sep 17, 2009 3:33 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
ah k. But still weird.. |
|
| Author: | Benz [ Fri Sep 18, 2009 12:39 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
the jap ones have two different length springs in the Rear. drivers side is longer. yours will most likely be a jap build but you can have a look if you want. the drivers side spring will be thicker too and the passenger side thinner. your jimny will corner a lot better with the ome kit in =] |
|
| Author: | Benz [ Fri Sep 18, 2009 12:48 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
they also gave me a trim packer. i put the kit in myself and didn't use it. she sits nice and level =] get a wheel alignment after you get the lift kit put in. mine was out and made it crap to drive at high speeds anyway... so. bigger wheels???? |
|
| Author: | BAZZOOK [ Sat Sep 19, 2009 12:06 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
he jap ones have two different length springs in the Rear. drivers side is longer. yours will most likely be a jap build but you can have a look if you want. the drivers side spring will be thicker too and the passenger side thinner. thanks for that, I mightn't have noticed |
|
| Author: | BAZZOOK [ Sat Sep 19, 2009 12:10 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
mmmmmm hard chromed & polished piston rod mmmmmmmmmmm |
|
| Author: | BAZZOOK [ Sat Sep 19, 2009 10:06 pm ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
back done |
|
| Author: | Collo [ Fri Oct 22, 2010 7:00 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
Ahhhh... ooops. I think I may have ordered the wrong OME springs. What to do, as they get installed soon? Mine is a 2010, and i'm getting the Spanish springs!!! |
|
| Author: | Benz [ Fri Oct 22, 2010 7:43 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
send them back =] |
|
| Author: | dm90 [ Fri Oct 22, 2010 8:07 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
i just assumed mine was japanese cause it had jap writing inside the engine bay. the longer spring in the rear is a retarded thing. i didnt notice when we put mine in, we assumed if there was gonna be a longer spring it would be in the front. unfortunately i drove around with the wrong spring for months. hahah, looked like a knob |
|
| Author: | Collo [ Fri Oct 22, 2010 8:17 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
Thnks for the advice, i'll see how I go cancelling it. It's taken so long to get it in stock, I just want the lift already! Anyone got the EFS 50mm kit, and if so is it any good? This will be my second choice failing the OME. |
|
| Author: | Birdman1985 [ Fri Oct 22, 2010 9:08 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
I got lovells 50mm springs but i found theya re too damn heavy duty for such a light car. 14mm coil thickness. I'm searchinga round for something thinner/softer. Mitch. |
|
| Author: | squibby [ Mon Sep 12, 2011 2:50 am ] |
| Post subject: | Re: JIMNY SHOCKS/SPRINGS. |
This is confusing. My advice to anyone is to buy the jap spec springs, these are taller for the drivers side. I've got euro in the hardest spring rates and it's 10mm lower on the drivers side, and about 30mm lower on the front then the back. I've got a pair 20mm spacers from outdoorauto4x4 for the front, and a pair of 10mm rings from ARB that I'm goingt to fit on the drivers side front and back. So essentially it should be level, and the arse will sit about 10mm higher then the front when unladen. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|