$15-$20 for Castrol or $100-$150+ for Redline.
| auszookers.com https://auszookers.com/forum/ |
|
| what oil to use in transfer with 6.5:1 https://auszookers.com/forum/viewtopic.php?f=5&t=6738 |
Page 1 of 1 |
| Author: | 89_tintop [ Sun Sep 20, 2009 12:01 am ] |
| Post subject: | what oil to use in transfer with 6.5:1 |
as the topic sais.. what do people use and what do people find to be the best in the transfer case |
|
| Author: | hutch [ Sun Sep 20, 2009 12:23 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
Did u put the 6.5 gears in yourself. I need to do mine soon. Any tips? I was gonna run the standard castrol 80/90. |
|
| Author: | want33s [ Sun Sep 20, 2009 12:45 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
Standard recommended transfer oil is the go. Castrol VMX80... |
|
| Author: | Gwagensteve [ Sun Sep 20, 2009 1:06 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
I run heavy weight Redline shockproof in mine. IMHO normal 80/90W is fine though. Steve. |
|
| Author: | shep [ Sun Sep 20, 2009 1:07 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
i have vmx80 with about 200ml of moreys. |
|
| Author: | want33s [ Sun Sep 20, 2009 1:09 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
$15-$20 for Castrol or $100-$150+ for Redline.
|
|
| Author: | 89_tintop [ Sun Sep 20, 2009 1:20 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
Hey hutch no I didn't install them myself.. Got them already in a box. So I have no idea.. They are suppose to be fairly easy to install.. Cheers guys for the response.. I just wasn't sure if they run some special oil in them.. Moreys?? Is it similar to gearbox treatment?? |
|
| Author: | shep [ Sun Sep 20, 2009 1:22 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
moreys is just an additive, because it is so hot here i recon gear oil needs a bit of help. |
|
| Author: | ajsr [ Sun Sep 20, 2009 1:53 am ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
i use 80% moreys 20% 90w gear oil |
|
| Author: | twitchy [ Sun Sep 20, 2009 12:58 pm ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
Simple......... Penrite. |
|
| Author: | hutch [ Sun Sep 20, 2009 1:01 pm ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
shep wrote: with about 200ml of moreys.
Is that to keep the seals soft? |
|
| Author: | shep [ Sun Sep 20, 2009 1:20 pm ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
i don't think it affects the seals, it is a oil stabiliser. |
|
| Author: | 89_tintop [ Sun Sep 20, 2009 3:06 pm ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
will i put the transfer into the car.. i ended using a 80/90 and some moreys.. am amazed at how low low range now is... it blew me away... the best mod by far.. and got them for a steel.. $300 and some time to sought out why his car wouldnt start after an engine conversion (took me 5 minutes) blown fuse and fusible link.. hehehe |
|
| Author: | shep [ Sun Sep 20, 2009 3:25 pm ] |
| Post subject: | Re: what oil to use in transfer with 6.5:1 |
i recon gearing is the most important mod that can be done to a sierra. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|