| auszookers.com https://auszookers.com/forum/ |
|
| 1991 Suzuki Sierra Vacuum system https://auszookers.com/forum/viewtopic.php?f=5&t=6877 |
Page 1 of 1 |
| Author: | 4WDNROX [ Sun Sep 27, 2009 3:43 am ] |
| Post subject: | 1991 Suzuki Sierra Vacuum system |
Here's hoping someone can help. I have just put my carby back on after many years of neglect . My next problem is I have no idea where any of the Vacuum hoses go. I'm hoping someone can help out with some engine bay pictures and/or a scymatic diagram of the vacuum hoses. Any help would be greatly appreciated. 
|
|
| Author: | DMAC [ Sun Sep 27, 2009 12:04 pm ] |
| Post subject: | Re: 1991 Suzuki Sierra Vacuum system |
Do your vac pipes have numbers on them? I've got a heap of photos Just got to load them up. |
|
| Author: | eldo [ Sun Sep 27, 2009 1:20 pm ] |
| Post subject: | Re: 1991 Suzuki Sierra Vacuum system |
4WDNROX wrote: Here's hoping someone can help. I have just put my carby back on after many years of neglect . My next problem is I have no idea where any of the Vacuum hoses go. I'm hoping someone can help out with some engine bay pictures and/or a scymatic diagram of the vacuum hoses. Any help would be greatly appreciated.
hey welcome across to the dark side, you will enjoy this forum much more. im sure someone will correct me but i think there is a full service manual in the downloads section... i have been out spreading the word see!!!!! http://www.4wdmonthly.com.au/forum/show ... hp?t=77619 |
|
| Author: | shep [ Sun Sep 27, 2009 1:30 pm ] |
| Post subject: | Re: 1991 Suzuki Sierra Vacuum system |
every thing ya need is in the download section. i have a sierra carb that works very well with everything removed except for the vac secondary's and the vac line for the vac advance. dunno how it would go in vic though. 
|
|
| Author: | rickdorrough [ Sat Apr 02, 2011 7:33 am ] |
| Post subject: | Re: 1991 Suzuki Sierra Vacuum system |
I have the same problem, where do i find this diagram in the download section? I have some lines mixed up when changed head gasket and now car will only run for about 1 minute before it cuts out????? Help |
|
| Author: | Teracis [ Sun Apr 03, 2011 5:33 am ] |
| Post subject: | Re: 1991 Suzuki Sierra Vacuum system |
Hey rick, there's a heap of info in the full service manual, it's the one for an sj413. Explain what happens when you go to start/run the thing. Is it easy to start after it has stalled? or is it hard to start followed by 1 minute of idle? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|