| auszookers.com https://auszookers.com/forum/ |
|
| Vit radiator questions... https://auszookers.com/forum/viewtopic.php?f=5&t=7120 |
Page 1 of 1 |
| Author: | 31zook [ Sat Oct 10, 2009 9:03 pm ] |
| Post subject: | Vit radiator questions... |
I went off to NIK's house today to help with installing seats and stuff then when were painting i found a vit rad in real good condition 
It's made of plastic and has a auto cooling bit at the bottom, and is roughly 470-480mm tall... I know one of the model vit rads need a BL to make them fit just wondering if this is that model? Cheers josh |
|
| Author: | royce [ Sat Oct 10, 2009 9:22 pm ] |
| Post subject: | Re: Vit radiator questions... |
measure the distance from the front tube crossmember on your chassis and the bonnet, if its less than 480mm youll need a bodylift 
Oh yeah almost forgot !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! |
|
| Author: | 31zook [ Sat Oct 10, 2009 9:25 pm ] |
| Post subject: | Re: Vit radiator questions... |
 thanks...
|
|
| Author: | royce [ Sat Oct 10, 2009 9:32 pm ] |
| Post subject: | Re: Vit radiator questions... |
From memory mine was flush with the bottom of the crossmember and I would of had room to not have a bodylift and it was a jap wagon auto raditaor |
|
| Author: | 31zook [ Sat Oct 10, 2009 10:06 pm ] |
| Post subject: | Re: Vit radiator questions... |
Ok.. hmm i think im going to measure the original radator and see if i can just make it fit... Im also trying to make this 1L case i have a twin sticker but i think the internals are different to a 1.3... does anyone know? |
|
| Author: | royce [ Sat Oct 10, 2009 10:10 pm ] |
| Post subject: | Re: Vit radiator questions... |
the bits you change for useless stick should be the same
|
|
| Author: | 31zook [ Sat Oct 10, 2009 10:15 pm ] |
| Post subject: | Re: Vit radiator questions... |
Hmm yeah but when i look on the 6.5s pdf maual it looks alot different to the one in my hands... this is a genuine 1L not one with a light im just practicing on it... |
|
| Author: | royce [ Sat Oct 10, 2009 10:20 pm ] |
| Post subject: | Re: Vit radiator questions... |
the gears are completely different but they way they shift is still the same |
|
| Author: | 31zook [ Sat Oct 10, 2009 10:22 pm ] |
| Post subject: | Re: Vit radiator questions... |
ok ill keep searching... |
|
| Author: | evilrubberchicken [ Mon Oct 12, 2009 3:56 pm ] |
| Post subject: | Re: Vit radiator questions... |
I have installed that same vit auto radiator in my sierra (no body lift) and with the radiator mounted flush with the top of the front cross member definitely doesnt clear the bonnet. I am installing a body lift soon so just have to wait. What have people done for the top mount on this radiator conversion?? at the moment i have zip ties and a rag...ha ha. |
|
| Author: | joeblow [ Mon Oct 12, 2009 4:24 pm ] |
| Post subject: | Re: Vit radiator questions... |
search my posts, i'm pretty sure i have posted pics up somewhere. |
|
| Author: | 31zook [ Mon Oct 12, 2009 8:36 pm ] |
| Post subject: | Re: Vit radiator questions... |
woo hoo after about a billion searches i can now say that my rad is the bigger one and ill need to mod some stuff to make it fit without a BL... cheers joe and the rest... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|