| auszookers.com https://auszookers.com/forum/ |
|
| transfer gear question https://auszookers.com/forum/viewtopic.php?f=5&t=7127 |
Page 1 of 1 |
| Author: | zookster666 [ Sun Oct 11, 2009 2:08 am ] |
| Post subject: | transfer gear question |
A mate of mine has 6.5 transfer gears and they werent installed properley and it has destroyed the rear output shaft gear. So my question is that gear a standard one or does it come in the full 6.5 gear set and can it be bought seperately as he said i can have them cheers |
|
| Author: | shep [ Sun Oct 11, 2009 2:15 am ] |
| Post subject: | Re: transfer gear question |
hhmm my 6.5's have a lifetime warranty, maybe you should check that out. |
|
| Author: | zookster666 [ Sun Oct 11, 2009 2:20 am ] |
| Post subject: | Re: transfer gear question |
my mate who had them installed had to pay out of his own pocket to get new ones because of the company who installed them wont take responsibility for it |
|
| Author: | shep [ Sun Oct 11, 2009 2:45 am ] |
| Post subject: | Re: transfer gear question |
if they are t-g 6.5's it is a manufacturer warranty, ya just send them back to the manufacturer and they replace them. |
|
| Author: | zookster666 [ Sun Oct 11, 2009 2:47 am ] |
| Post subject: | Re: transfer gear question |
what brand is that and ill take a look into it after i ask my mate |
|
| Author: | shep [ Sun Oct 11, 2009 2:53 am ] |
| Post subject: | Re: transfer gear question |
the 6.5's on this page, you have to send them to seppo land but i doubt that it would cost $50 http://lowrangeoffroad.com/samtcase.htm |
|
| Author: | Gwagensteve [ Sun Oct 11, 2009 12:40 pm ] |
| Post subject: | Re: transfer gear question |
All the gears are different between a standard set and a rockhopper. Steve. |
|
| Author: | 303zuke [ Sun Oct 11, 2009 6:20 pm ] |
| Post subject: | Re: transfer gear question |
Gwagensteve wrote: All the gears are different between a standard set and a rockhopper.
Steve. Only the 6.5:1 and 8:1 sets. The 4.16 and 4.9 sets contain some factory gears, just in an arrangement never foreseen by the factory. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|