auszookers.com
https://auszookers.com/forum/

Holy Shit!
https://auszookers.com/forum/viewtopic.php?f=5&t=7150
Page 1 of 1

Author:  lump_a_charcoal [ Sun Oct 11, 2009 11:26 pm ]
Post subject:  Holy Shit!

6.5s fuckin rock!

That is all. 8)

Author:  steak_knife [ Sun Oct 11, 2009 11:31 pm ]
Post subject:  Re: Holy Shit!

8) :lol: :lol:

Author:  ajsr [ Sun Oct 11, 2009 11:31 pm ]
Post subject:  Re: Holy Shit!

didn't you have gears before?
what tyres you running?
and yes they are cool

Author:  lump_a_charcoal [ Mon Oct 12, 2009 12:19 am ]
Post subject:  Re: Holy Shit!

I had stock gears before, but had 5.12 diffs, with 31s.
Now I have 3.9 diffs, with the 31s still, and the 6,5s, it's pretty good!

Author:  v.w.dave [ Mon Oct 12, 2009 12:25 am ]
Post subject:  Re: Holy Shit!

Just a tip...
If your transcase mounts arn't already renewed you need to do so...

Author:  lump_a_charcoal [ Mon Oct 12, 2009 12:41 am ]
Post subject:  Re: Holy Shit!

Yeah I have a mighty kong cradle, with brand new mounts.

Author:  jimbo_jones [ Mon Oct 12, 2009 2:08 am ]
Post subject:  Re: Holy Shit!

lump_a_charcoal wrote:
6.5s fuckin rock!

That is all. 8)



Yes......yes they are cool 8)

Author:  BlueSuzy [ Mon Oct 12, 2009 3:31 am ]
Post subject:  Re: Holy Shit!

i fuckin told you ages ago. Im glad you woke up to yourself. :lol:

Author:  lump_a_charcoal [ Mon Oct 12, 2009 8:28 pm ]
Post subject:  Re: Holy Shit!

I know the gears have a whine to them, but mine sound like something out of The Jetsons - Is it normal for them to be quite noticeable?

Author:  Dee [ Mon Oct 12, 2009 8:32 pm ]
Post subject:  Re: Holy Shit!

stick it 5th & check out the whine :twisted:

yes, normal, they are spinning fuckin fast in there...

Author:  Damo [ Mon Oct 12, 2009 8:41 pm ]
Post subject:  Re: Holy Shit!

lump_a_charcoal wrote:
I know the gears have a whine to them, but mine sound like something out of The Jetsons - Is it normal for them to be quite noticeable?


Mine quietened down a bit after not too long.

Author:  Rockhopper [ Mon Oct 12, 2009 8:48 pm ]
Post subject:  Re: Holy Shit!

In low range - yes they have a whine, but in high range mine does sound a little differant to standard but definatly not a whine

Author:  lump_a_charcoal [ Mon Oct 12, 2009 9:20 pm ]
Post subject:  Re: Holy Shit!

After the first oil change (probably about 800kms) I might put some teflon goop in...

Author:  shep [ Mon Oct 12, 2009 11:57 pm ]
Post subject:  Re: Holy Shit!

lump_a_charcoal wrote:
After the first oil change (probably about 800kms) I might put some teflon goop in...


why don't ya stick in a hyclone at the same time :D

Author:  acc1 [ Sun Oct 18, 2009 5:43 am ]
Post subject:  Re: Holy Shit!

so where does everyone get there tcase mounts from when putting lower gears in?

Also what is the standard diff gearing for 91 sierra's?

Author:  Rockhopper [ Sun Oct 18, 2009 11:05 am ]
Post subject:  Re: Holy Shit!

Given the rate of the aussie dollar at the moment I'd be getting mine from lowrangeoffroad.com. It's about $200 au at the moment for the mighty kong transfer bucket + postage, or loctup4x4.com.au have the mighty kong for $429 and that includes shipping. Personally I'd go lowrange.com. I know it'll be a big package but I can't see it being another $200 + in postage

Author:  acc1 [ Sun Oct 18, 2009 2:07 pm ]
Post subject:  Re: Holy Shit!

That's where ive been pricing some things.. Ive just not committed to it yet.. :S
So I take it the mighty kong is probably the best one to get out of the lot? They say its the most popular.. Id say that's a good thing.. :)

I have 235's with I assume standard gearing. Should I get 6.5:1? I will be going a size up in tyres when these ones are warn out and I don't wanna change gears twice..

Is it advisable to get the new output shaft to at the same time to? Or will the original do for a while? with or without bearing.

Whats everyone else done with the output shaft?

hmmmmmmm...

Author:  Rockhopper [ Sun Oct 18, 2009 7:52 pm ]
Post subject:  Re: Holy Shit!

I've got 6.5's with 31" tyres and the gearing is about right. Can't advise you on the output shaft. I just replaced all the bearings and the gears in my transfer case and I hav'nt run into any problems yet. Having said that, my sierra had about 140k on the clock from new, had only been offroad after I bought it from the 2nd owner, and had been serviced at suzuki it's whole life before I got it too, so everything was in pretty good nick when I stripped it down

Author:  shep [ Sun Oct 18, 2009 8:29 pm ]
Post subject:  Re: Holy Shit!

apparently the output shaft is ok if it is after 94. i found a 95 trans box and have had no problems with the box or gears at all.

Author:  acc1 [ Sun Oct 18, 2009 8:53 pm ]
Post subject:  Re: Holy Shit!

mines a 91 and i know its been used offroad abit already and probably not looked after as well as i do for it.. I wonder if I should try with the normal one then buy the update when / if it needs it? Considering ive only got smallish tyres I think it will be ok for a while?

I just really wanna get some crawling gears back as it sucks not attempting things that are steep / slow sections because I know my gearing will let me down :(

That and I might get a lockright locker for the rear for it..?

Whats the limit for importing before tax? Is it still $1,500AU or is it something else?

Maybe I should make a list and get my self a big expensive xmas present for my suzi lol

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/