auszookers.com
https://auszookers.com/forum/

What Cam do you use
https://auszookers.com/forum/viewtopic.php?f=5&t=7183		 Page 1 of 1
Author:  v.w.dave [ Tue Oct 13, 2009 3:27 am ]
Post subject:  What Cam do you use
I am putting a 1.6 block with 1.3 head (head is shaved 50 thou) I have 4/2/1 extractors new 8 mm wires and a newly rebuilt Carby.
If you have tried a few cams or have one in your G13 or G16 orwhat I have can you let me know how they are?
I have heard a few names tossed around but I want to know from the people that actualy have them to tell me what they are like.
What kind of price should I be paying?
Author:  twitchy [ Tue Oct 13, 2009 11:03 am ]
Post subject:  Re: What Cam do you use
try here http://tighecams.com.au/ will make it just how you'd like.
Author:  v.w.dave [ Tue Oct 13, 2009 2:04 pm ]
Post subject:  Re: What Cam do you use
Cool thanks I gave them a call. They are a little pricie I am looking for something a little more over the counter nothing too big more everyday driving.... If I cant find anything else cheaper I still might hitthem up.
Author:  royce [ Tue Oct 13, 2009 2:10 pm ]
Post subject:  Re: What Cam do you use
$110 is too dear?
Author:  SuziBlu [ Tue Oct 13, 2009 2:43 pm ]
Post subject:  Re: What Cam do you use
On the subject of cams, does anyone know what is the best for midrange revs, stock, or is it worth going aftermarket.

I have a webber and a very short 2" exhaust after 4-2-1 extractors, so, do I put up with this till I am sick of it then go for a 1.6l, or change cams.

My little car is quite rusty, as it is a beach machine, and I would like a new body, or maybe buy a stocker in good nick and swap my good parts over, so I am unsure which way to go. Maybe piss it off and buy a Rubicon.
Author:  BlueSuzy [ Tue Oct 13, 2009 2:52 pm ]
Post subject:  Re: What Cam do you use
SuziBlu wrote:
Maybe piss it off and buy a Rubicon.


:youdaman:
Author:  SuziBlu [ Tue Oct 13, 2009 2:58 pm ]
Post subject:  Re: What Cam do you use
http://www.portal-tek.com/cpg1418/displ ... m=10&pos=0


Now this is a toy, Rubicon with portal diffs, sort of like Suzis big brother.
Author:  buzbox [ Tue Oct 13, 2009 4:51 pm ]
Post subject:  Re: What Cam do you use
I was quoted about 500 for a crow cam, maybe go with the 1.3 GTI twin cam head conversion. Or do a regrind job on the standard cam.
Author:  steak_knife [ Tue Oct 13, 2009 9:38 pm ]
Post subject:  Re: What Cam do you use
twitchy wrote:
try here http://tighecams.com.au/ will make it just how you'd like.


Is that Ivan Tighe? If it is he`s the BEST!!!!!

Had heap`s of cam`s from him, worth every penny spent.
Author:  v.w.dave [ Thu Oct 15, 2009 4:40 am ]
Post subject:  Re: What Cam do you use
ROYCE????????????????
Author:  v.w.dave [ Thu Oct 15, 2009 4:41 am ]
Post subject:  Re: What Cam do you use
Where can I get this $110 cam?????
Author:  twitchy [ Thu Oct 15, 2009 9:59 am ]
Post subject:  Re: What Cam do you use
SuziBlu wrote:
On the subject of cams, does anyone know what is the best for midrange revs, stock, or is it worth going aftermarket.




Half throttle.... yess!!
Author:  SuziBlu [ Thu Oct 15, 2009 1:56 pm ]
Post subject:  Re: What Cam do you use
naaa, lol, full throttle or stopped
Author:  royce [ Thu Oct 15, 2009 2:09 pm ]
Post subject:  Re: What Cam do you use
v.w.dave wrote:
ROYCE????????????????


Fucks me I replied to your PM but they seem to have been deleted :)

Yeah Tighe regrind, you ask for G13b Cams they assume you mean GTI not sierra which are $500

Gypsy has one in his and it goes pretty good
Author:  v.w.dave [ Fri Oct 16, 2009 2:59 am ]
Post subject:  Re: What Cam do you use
hmmm I didnt delete them???? hmm I dont know....
Actualy when I called the lady that I spoke to at first didnt think they did anything for SOHC zooks she had to go ask some one (10 mins went by) then she came back and told me 450 to 600 depending.....
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/