| auszookers.com https://auszookers.com/forum/ |
|
| will Wt extractors fit on a coily? https://auszookers.com/forum/viewtopic.php?f=5&t=7346 |
Page 1 of 1 |
| Author: | jonga [ Tue Oct 20, 2009 1:03 am ] |
| Post subject: | will Wt extractors fit on a coily? |
ok, so ive driven rusho81s coily and.....lets just say the wishlist for my coily just tripled in size. got a 2 inch spring lift in (well half of it) and im going to buy some extractors for a wt but before i do, will they fit on a coily? |
|
| Author: | nick.gooding [ Tue Oct 20, 2009 1:23 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
jonga wrote: ok, so ive driven rusho81s coily and.....lets just say the wishlist for my coily just tripled in size.
got a 2 inch spring lift in (well half of it) and im going to buy some extractors for a wt but before i do, will they fit on a coily? WT NT doesn't matter, and from what i have herd you need to get extractors to suit a coily and make sure there not suited for a leaf sprung. Anyone know if thats defiantly true. |
|
| Author: | coilyzook [ Tue Oct 20, 2009 1:40 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
yea the extractors for a leafy wont fit a coily |
|
| Author: | Rusho [ Tue Oct 20, 2009 9:59 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
jonga wrote: ok, so ive driven rusho81s coily and.....lets just say the wishlist for my coily just tripled in size.
Hehehehe....now he's hooked |
|
| Author: | BlueSuzy [ Tue Oct 20, 2009 12:02 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
I think Saam? has 1.3 extractors not to suit a specific "coily". He had to modify them via hammer to clear the steering bar that runs over the diff centre.I think? When flexing(if you have flex) you will see what i mean. Leafys have all their steering bars up the front(incase you didnt know) |
|
| Author: | Saam [ Tue Oct 20, 2009 6:45 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
NOPE they fit fine as far as i know, they never went near anything on my coily when i got it.... don't have extractors anymore due to the g13bb but if i got them jimny ones would fit.
not a good pic but there is extractors hiding in there. the steering bar runs under the diff centre anyways |
|
| Author: | Saam [ Tue Oct 20, 2009 6:46 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
i can't understand why they wouldn't fit ???? |
|
| Author: | jonno_racing [ Tue Oct 20, 2009 6:58 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
normal extractors dont fit.. i tryed them on mine and they hit sitting still with stock suspension. u need coily ones |
|
| Author: | Saam [ Tue Oct 20, 2009 8:23 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
crazy, mine must have been coily ones then |
|
| Author: | Bruce [ Tue Oct 20, 2009 11:14 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
When I replaced Casper's motor with a Coily 97 motor (BA1298cc) I used the same extractors off the old leaf (1324cc) motor. Fitted without a worry. |
|
| Author: | Saam [ Tue Oct 20, 2009 11:16 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
yeah it's not a motor thing bruce apparently it is a suspension thing. the g13ba has the same bolt pattern as the g13a and g13b for sure. |
|
| Author: | Bruce [ Tue Oct 20, 2009 11:20 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
ooh thanks Sam |
|
| Author: | jonga [ Wed Oct 21, 2009 12:08 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
So should I buy them and have a go? |
|
| Author: | jonga [ Wed Oct 21, 2009 12:12 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
I've got a two inch lift on my suspension so I don't see why not |
|
| Author: | Rusho [ Wed Oct 21, 2009 12:21 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
jonga wrote: I've got a two inch lift on my suspension so I don't see why not
Almost have a two inch lift |
|
| Author: | jonga [ Wed Oct 21, 2009 12:24 am ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
Haha kudos to you, and disgraced by pedders |
|
| Author: | Ridge [ Tue Oct 27, 2009 8:30 pm ] |
| Post subject: | Re: will Wt extractors fit on a coily? |
the extractors for a wt will bolt up fine to the engine. the problem is they will hit on the tie rod bar behind the diff when flexing. the coily extractors are shorter then the wts', engine mounting point too exhaust |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|