auszookers.com
https://auszookers.com/forum/

engine swap idea's and locations
https://auszookers.com/forum/viewtopic.php?f=5&t=7467
Page 1 of 1

Author:  Snub-Nose [ Sun Oct 25, 2009 4:43 am ]
Post subject:  engine swap idea's and locations

hi, I'm wanting to upgrade my engine in my 84 swb sierra, the body is in top shape and would like to dump something bigger in it.. i'm only wanting to spend about 3 or so g's on it and am wondering if you guys could give me a few tips on what to put in and where i can get it done in ADELAIDE.. cheers

Author:  v.w.dave [ Sun Oct 25, 2009 5:07 am ]
Post subject:  Re: engine swap idea's and locations

suzisport has a complete kit right now that has EVERYTHING to drop a 1.6EFI in for $3000 that includes shipping. the kit include complete engine wire harness, computer, addaptor kit for the trans, fuel pump, fuel lines and a few other things. All you need is a place to put it in. when you call there ask for ummmmm I can't think of his name...... Some one help me out what is the owners name???? is it Daniel?????

Author:  v.w.dave [ Sun Oct 25, 2009 6:04 am ]
Post subject:  Re: engine swap idea's and locations

Oh and a nother cheap way is to go to your local wrecked car auction and get a vitara that had been rolled or had a bad rear ender and transplant everything.

Author:  royce [ Sun Oct 25, 2009 12:08 pm ]
Post subject:  Re: engine swap idea's and locations

I am guessing its a 1 litre? if so it makes fitting a 1.6 a little more work, youll need a body lift most likely as the tunnel and bonnet are different, youll need to get a 1.3 gearbox and make up a jackshaft and engine and gearbox mounts to suit, so a drive in 1.6 carby conversion will still be pretty dear.

1 litres are pretty tuff engines, get it rebuilt and turbo it :)

Author:  steak_knife [ Sun Oct 25, 2009 12:26 pm ]
Post subject:  Re: engine swap idea's and locations

royce wrote:
I am guessing its a 1 litre? if so it makes fitting a 1.6 a little more work, youll need a body lift most likely as the tunnel and bonnet are different, youll need to get a 1.3 gearbox and make up a jackshaft and engine and gearbox mounts to suit, so a drive in 1.6 carby conversion will still be pretty dear.

1 litres are pretty tuff engines, get it rebuilt and turbo it :)


I'd like to see one of these :P

If it's a 1lt yo can go the toyota 5k & 5 speed, suzi sport used to do a kit of jack shaft, eng mount adaptors & g/box mount. toy moter is reliable but thay are getting rare.

Author:  zookfun [ Sun Oct 25, 2009 1:18 pm ]
Post subject:  Re: engine swap idea's and locations

Have you thought about putting in a G13b? They are meant to be a fair bit faster, and more reliable. Im almost finished putting one in my zook atm- Im from adelaide too if you want to come and have a look!

Author:  zookster666 [ Sun Oct 25, 2009 1:20 pm ]
Post subject:  Re: engine swap idea's and locations

5k's are very rare to get a holdof im still lookig for one for parts

Author:  michael [ Sun Oct 25, 2009 3:46 pm ]
Post subject:  Re: engine swap idea's and locations

You can turbo a 1L..? That sounds interesting...Is it hard to do?

Author:  coilyzook [ Sun Oct 25, 2009 5:15 pm ]
Post subject:  Re: engine swap idea's and locations

do a 13b rotary conversion, that yould give you heaps more power

Author:  steak_knife [ Sun Oct 25, 2009 5:26 pm ]
Post subject:  Re: engine swap idea's and locations

coilyzook wrote:
do a 13b rotary conversion, that yould give you heaps more power


:shocked: :shocked: You boy's complain about the fuel consumption now, a 13b rotor use's more fuel at idle than a zook valve bouncing!!! :roll:

Author:  2stroker [ Sun Oct 25, 2009 8:58 pm ]
Post subject:  Re: engine swap idea's and locations

Steve is that your cat bit hard to tell with that disguise

Author:  steak_knife [ Sun Oct 25, 2009 11:22 pm ]
Post subject:  Re: engine swap idea's and locations

2stroker wrote:
Steve is that your cat bit hard to tell with that disguise


Cat's gone camp. 8O

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/