auszookers.com
https://auszookers.com/forum/

extended bumpstops
https://auszookers.com/forum/viewtopic.php?f=5&t=7501		 Page 1 of 1
Author:  BJPK [ Mon Oct 26, 2009 3:31 pm ]
Post subject:  extended bumpstops
could anyone post up pics of how they have extended their bumpstops?
leaf sprung sierra.
Author:  want33s [ Mon Oct 26, 2009 3:47 pm ]
Post subject:  Re: extended bumpstops
Can't find a decent pic but my fronts are just a piece of 50x25 box about 110mm long fitted between bump rubber and chassis with some longer bolts.
Rears are 50x25 welded on to chassis.
Author:  BJPK [ Mon Oct 26, 2009 3:59 pm ]
Post subject:  Re: extended bumpstops
cool this is basically all i had in mind.
only going to run 29s cause i want to avoid body lift.
i have ome springs and shocks.
any idea how much i should extend the stops? to avoid tyres rubbing?
Author:  zooker [ Mon Oct 26, 2009 4:30 pm ]
Post subject:  Re: extended bumpstops
BJPK wrote:
cool this is basically all i had in mind.
only going to run 29s cause i want to avoid body lift.
i have ome springs and shocks.
any idea how much i should extend the stops? to avoid tyres rubbing?


With 29's you wont need to. I fit 30's on mine with only a small amount of hammering the seams in the guards
Author:  SuziBlu [ Mon Oct 26, 2009 5:14 pm ]
Post subject:  Re: extended bumpstops
I have not altered my bump stops, have 31s, I think it depends on the style of driving.

Over where you are, its more into sand, and I recon you could do away with longer bump stops.

I got 5" of total lift but.
Author:  Scrawny [ Mon Oct 26, 2009 6:55 pm ]
Post subject:  Re: extended bumpstops
Bumpstops all depend on shock length. I run the Commo shocks on the front with 40mm bumpstop spacers. Rears yet to be sorted.
Author:  BJPK [ Mon Oct 26, 2009 8:32 pm ]
Post subject:  Re: extended bumpstops
[quote="ScrawnC"]Bumpstops all depend on shock length. I run the Commo shocks on the front with 40mm bumpstop spacers. Rears yet to be sorted.[/quote

when running a standard size tyre they would never rub even when fully compressed.
but i would assume that a bigger tyre would hit the top of the gaurd before the bumpstop would touch?
so by extending the bumpstop, it would then stop on it rather than stopping when the tyre rubs? saving the tyres from being damaged.
Author:  zooker [ Mon Oct 26, 2009 9:10 pm ]
Post subject:  Re: extended bumpstops
BJPK wrote:
ScrawnC wrote:
Bumpstops all depend on shock length. I run the Commo shocks on the front with 40mm bumpstop spacers. Rears yet to be sorted.


when running a standard size tyre they would never rub even when fully compressed.
but i would assume that a bigger tyre would hit the top of the gaurd before the bumpstop would touch?
so by extending the bumpstop, it would then stop on it rather than stopping when the tyre rubs? saving the tyres from being damaged.


Correct however a 29" tyre is not big enough to rub in the guards. I had 32" tyres and I only then needed a 1" bumpstop spacer, and that was really only because I was running the commo shocks which would bottom out if I didnt extend the bumpstops.

So you'll be fine, wouldnt worry about it :wink:
Author:  31zook [ Mon Oct 26, 2009 9:21 pm ]
Post subject:  Re: extended bumpstops
i run 31's on no lift, 25mm bumps and front diff 20mm forward
Author:  31zook [ Mon Oct 26, 2009 9:27 pm ]
Post subject:  Re: extended bumpstops
I had to tap a thread to get it 20mm forward and in 25x25 SHS
Image
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/