I got my gti motor in wired up with the std comp she has spark injector pulse and fuel press but wont start
fuck fuck fuck Its giving me the shits anyone want to come have a look I cant figure it out
| auszookers.com https://auszookers.com/forum/ |
|
| help please!!!!! https://auszookers.com/forum/viewtopic.php?f=5&t=7542 |
Page 1 of 1 |
| Author: | jimbo_jones [ Tue Oct 27, 2009 10:17 pm ] |
| Post subject: | help please!!!!! |
I got my gti motor in wired up with the std comp she has spark injector pulse and fuel press but wont start fuck fuck fuck Its giving me the shits anyone want to come have a look I cant figure it out
|
|
| Author: | Scrawny [ Wed Oct 28, 2009 12:27 am ] |
| Post subject: | Re: help please!!!!! |
Does it have compression? Did you play with timing? Does it have an engine check light? |
|
| Author: | zookernator [ Wed Oct 28, 2009 1:26 am ] |
| Post subject: | Re: help please!!!!! |
i had a similar prob.. i thought it might have been the timing, a wiring prob, etc etc.. turns out it was the coil!! was only sitting around for 8 months before i put it in, but that was enough time for the coil to die!! might be worth a check! |
|
| Author: | jimbo_jones [ Wed Oct 28, 2009 2:14 am ] |
| Post subject: | Re: help please!!!!! |
Will check it out and yes has compresson just rebuit the motor |
|
| Author: | joeblow [ Wed Oct 28, 2009 2:20 am ] |
| Post subject: | Re: help please!!!!! |
jimbo_jones wrote: Will check it out and yes has compresson just rebuit the motor
if its a type one you can get the tps and airflow sensor mixed up.....they have the same type plug......... |
|
| Author: | jimbo_jones [ Wed Oct 28, 2009 10:46 am ] |
| Post subject: | Re: help please!!!!! |
I will double check joe but I think the plugs were diferent |
|
| Author: | Scrawny [ Wed Oct 28, 2009 12:37 pm ] |
| Post subject: | Re: help please!!!!! |
Just thinking it might have dry rings since it's just been rebuilt leading to minimal or no compression. |
|
| Author: | jimbo_jones [ Wed Oct 28, 2009 5:01 pm ] |
| Post subject: | Re: help please!!!!! |
Joe the airfow wiring go's directly into the harness no plug |
|
| Author: | jimbo_jones [ Thu Oct 29, 2009 2:55 pm ] |
| Post subject: | Re: help please!!!!! |
 Got it running yay turned out to be a wire that runs from the neg coil to the ecu some sort of pulse wire the auto elec sorted
it Im just happy to see it run
|
|
| Author: | jimbo_jones [ Thu Oct 29, 2009 2:55 pm ] |
| Post subject: | Re: help please!!!!! |
| Got it running yay turned out to be a wire that runs from the neg coil to the ecu some sort of pulse wire the auto elec sorted
it Im just happy to see it run
|
|
| Author: | RIKSTR [ Thu Oct 29, 2009 7:12 pm ] |
| Post subject: | Re: help please!!!!! |
Was it a brown wire, always be on the look out for the brown wire when doing the gti conversion 
|
|
| Author: | jimbo_jones [ Thu Oct 29, 2009 10:24 pm ] |
| Post subject: | Re: help please!!!!! |
yep brown wire |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|