I had superwinch manual locking hubs on my GV, part of the Calmini kit.
They are the same as Vitara one but I think they are the same as the Sierra too
| auszookers.com https://auszookers.com/forum/ |
|
| Gv front hubs https://auszookers.com/forum/viewtopic.php?f=5&t=7603 |
Page 1 of 1 |
| Author: | tanshi [ Thu Oct 29, 2009 6:34 pm ] |
| Post subject: | Gv front hubs |
Can any one tell me if the GV ever had manual hubs from factory. Also can i get the GV owners (preferably the air activated hub ones) to take a quick pic of their front wheel. including hub? Im testing a theory |
|
| Author: | joeblow [ Thu Oct 29, 2009 6:51 pm ] |
| Post subject: | Re: Gv front hubs |
gv's had a locking system in the diff centre, the hubs had no mechanism. some early vits had mechanical locking hubs, and jimnys vaccum locking hubs. normal vit hubs will fit. |
|
| Author: | atari4x4 [ Thu Oct 29, 2009 6:52 pm ] |
| Post subject: | Re: Gv front hubs |
ODA1 has some good photo's in this thread! http://auszookers.com/index.php?name=Fo ... pic&t=4657 |
|
| Author: | RIKSTR [ Thu Oct 29, 2009 7:02 pm ] |
| Post subject: | Re: Gv front hubs |
I had superwinch manual locking hubs on my GV, part of the Calmini kit.
They are the same as Vitara one but I think they are the same as the Sierra too |
|
| Author: | tanshi [ Thu Oct 29, 2009 7:07 pm ] |
| Post subject: | Re: Gv front hubs |
so they had a solid drive flange on the hub end? |
|
| Author: | RIKSTR [ Thu Oct 29, 2009 7:09 pm ] |
| Post subject: | Re: Gv front hubs |
Yea, its a good way to perma lock your hubs if thats what you want to do. Not sure why you would want to 
|
|
| Author: | tanshi [ Thu Oct 29, 2009 7:10 pm ] |
| Post subject: | Re: Gv front hubs |
excellent cheers. theory confirmed |
|
| Author: | Bruce [ Thu Oct 29, 2009 7:12 pm ] |
| Post subject: | Re: Gv front hubs |
Ok, you can get any Vitara free wheeling hub or COILY Sierra (not Leaf ones) They fit without any mods. When I had my GV I fitted coily sierra free wheeling hubs. |
|
| Author: | tanshi [ Thu Oct 29, 2009 7:16 pm ] |
| Post subject: | Re: Gv front hubs |
I was actually looking at these for fully floating rear axle setup |
|
| Author: | RIKSTR [ Thu Oct 29, 2009 7:46 pm ] |
| Post subject: | Re: Gv front hubs |
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|