A jack.....
2" spring and 2" body
OR
2" spring and 31's
OR
just fit 33's and chop guards.
All will give 4" of lift one way or another.
| auszookers.com https://auszookers.com/forum/ |
|
| best way to lift a sierra... https://auszookers.com/forum/viewtopic.php?f=5&t=7608 |
Page 1 of 1 |
| Author: | 31zook [ Thu Oct 29, 2009 9:54 pm ] |
| Post subject: | best way to lift a sierra... |
Hey i only want about 4inch's of lift what is the best way yall reckon? |
|
| Author: | Damo [ Thu Oct 29, 2009 9:58 pm ] |
| Post subject: | Re: best way to lift a sierra... |
31zook wrote: Hey i only want about 4inch's of lift what is the best way yall reckon?
4" bodylift FTW |
|
| Author: | want33s [ Thu Oct 29, 2009 10:05 pm ] |
| Post subject: | Re: best way to lift a sierra... |
A jack.....
2" spring and 2" body OR 2" spring and 31's OR just fit 33's and chop guards. All will give 4" of lift one way or another. |
|
| Author: | 31zook [ Thu Oct 29, 2009 10:23 pm ] |
| Post subject: | Re: best way to lift a sierra... |
i was thinking 33s, ruf, 50mm rears... Or spoa... |
|
| Author: | kreecha [ Thu Oct 29, 2009 10:33 pm ] |
| Post subject: | Re: best way to lift a sierra... |
Dude, what lift or stage of build is your car at now? |
|
| Author: | 31zook [ Thu Oct 29, 2009 10:57 pm ] |
| Post subject: | Re: best way to lift a sierra... |
kreecha wrote: Dude, what lift or stage of build is your car at now?
stock as a rock, and no motor... I have rear springs and 6.5s in the shed... Ok so here is what im thinking i have access to a set of 15x8 lux rims (free). And when i find these 6 stud toy converters again ill get a set, as Im going to run toy diffs eventually, and i don't want to buy 15X8 zook pattern... I figure with all this width and lwb i could afford to go SPOA and still be stablish and i can get WT cheap 
So the choice is SPUA, guard choping, 33s and a RUF, Or spoa, spacers, and offset 15x8s.... |
|
| Author: | Highway-Star [ Fri Oct 30, 2009 1:03 am ] |
| Post subject: | Re: best way to lift a sierra... |
If your planning a diff swap "eventually", why dont you just do it? doing something temporary seems silly and a waste of time and money to me. Just a suggestion 
|
|
| Author: | mudzookacoatsy [ Fri Oct 30, 2009 11:13 am ] |
| Post subject: | Re: best way to lift a sierra... |
ive got spoa over diffs if u wanna buy them i took mine out... pm me if u want them |
|
| Author: | BlueSuzy [ Fri Oct 30, 2009 11:53 am ] |
| Post subject: | Re: best way to lift a sierra... |
wtf. Were'nt you going coils all round approved by an engineer? You have a swb, drive that while the lwb is off the road. Otherwise. 2"spring.2"body quickest lift possible. |
|
| Author: | RIKSTR [ Fri Oct 30, 2009 12:04 pm ] |
| Post subject: | Re: best way to lift a sierra... |
I can get you some 4" springs 
|
|
| Author: | BlueSuzy [ Fri Oct 30, 2009 12:11 pm ] |
| Post subject: | Re: best way to lift a sierra... |
You can get any lift springs if you wanted to.. Its called bench press.. |
|
| Author: | just_cruizin [ Fri Oct 30, 2009 1:09 pm ] |
| Post subject: | Re: best way to lift a sierra... |
fork lift, get anywhere from 4mm to 4m |
|
| Author: | 31zook [ Fri Oct 30, 2009 3:52 pm ] |
| Post subject: | Re: best way to lift a sierra... |
lol 
timmy, I'm going to start all the lux mods in about 18months so i need to get down to one car (own 3 atm), as i just sold my VL for a large pack of fireworks(now 2), the shorty need to go and I'm just looking for cheap mods till the lux modding is ready... Im now thinking that ill stay spua so i can rego it every year without engineering or hassle... also it will be less of a cop magnet... Now to massage my shorties backing plates back to straight and go wheeling tonight
|
|
| Author: | BlueSuzy [ Fri Oct 30, 2009 4:41 pm ] |
| Post subject: | Re: best way to lift a sierra... |
Oh ok. I thought you were getting your coils done "now". I know you got engineers approval. But as these laws are going, id be scared of not ever making coils legal again! Id love my lwb to have soft coils. But it would be in no time soon(like you). Oh and i also have 3 cars..swb.lwb.77rolla. And no licence to drive them 
|
|
| Author: | 31zook [ Fri Oct 30, 2009 5:00 pm ] |
| Post subject: | Re: best way to lift a sierra... |
Ya don't need a licence to web wheel...
yeah if there is no way of getting coils, lux diffs and 35-37s past then ill just have to rethink... Or just go trailor queen... |
|
| Author: | BlueSuzy [ Fri Oct 30, 2009 5:15 pm ] |
| Post subject: | Re: best way to lift a sierra... |
31zook wrote: Ya don't need a licence to web wheel...
I am web wheeling
|
|
| Author: | 31zook [ Fri Oct 30, 2009 8:21 pm ] |
| Post subject: | Re: best way to lift a sierra... |
haha and it uses no fuel
|
|
| Author: | BUZOOKA [ Thu Nov 05, 2009 1:54 am ] |
| Post subject: | Re: best way to lift a sierra... |
poor wittle timmy has no license wat stupid thing did u do lose it? |
|
| Author: | BlueSuzy [ Thu Nov 05, 2009 2:22 pm ] |
| Post subject: | Re: best way to lift a sierra... |
lack of points. 12 off.. Not the 1st time ive lost it
|
|
| Author: | BUZOOKA [ Thu Nov 05, 2009 3:18 pm ] |
| Post subject: | Re: best way to lift a sierra... |
well u should of learnt the first time ha ha when u get em back |
|
| Author: | BlueSuzy [ Thu Nov 05, 2009 3:54 pm ] |
| Post subject: | Re: best way to lift a sierra... |
5th jan |
|
| Author: | v.w.dave [ Thu Nov 05, 2009 6:09 pm ] |
| Post subject: | Re: best way to lift a sierra... |
I have a set of 2" springs I could part with at the right price... |
|
| Author: | BlueSuzy [ Thu Nov 05, 2009 6:13 pm ] |
| Post subject: | Re: best way to lift a sierra... |
Who doesnt
|
|
| Author: | BUZOOKA [ Thu Nov 05, 2009 11:16 pm ] |
| Post subject: | Re: best way to lift a sierra... |
u get em back three days before my b day so do u plan on lossing them again on the 4th or 6th 
|
|
| Author: | 31zook [ Fri Nov 06, 2009 2:21 pm ] |
| Post subject: | Re: best way to lift a sierra... |
v.w.dave wrote: I have a set of 2" springs I could part with at the right price...
what brand? im only rear interested in 50mm lift rears... 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|