| auszookers.com https://auszookers.com/forum/ |
|
| heater unit https://auszookers.com/forum/viewtopic.php?f=5&t=7651 |
Page 1 of 1 |
| Author: | mcwilly [ Sat Oct 31, 2009 8:45 pm ] |
| Post subject: | heater unit |
just wondering if theres an easy way of getting the heater unit out as it is clogged with mud and i want to clean it... thanks chris |
|
| Author: | Damo [ Sat Oct 31, 2009 10:33 pm ] |
| Post subject: | Re: heater unit |
mcwilly wrote: just wondering if theres an easy way of getting the heater unit out as it is clogged with mud and i want to clean it...
thanks chris Not really, it's pretty much a pull the dash out job. Apparantly you can drill a hole in the side of it and suck stuff out with a vacuum cleaner. I'd rather pull the lot out if it's that gunked up |
|
| Author: | mcwilly [ Sat Oct 31, 2009 10:49 pm ] |
| Post subject: | Re: heater unit |
yea i think its pretty bad. that sucks i was trying to just get part of it apart to clean it but didnt work |
|
| Author: | bazook [ Mon Nov 02, 2009 12:31 am ] |
| Post subject: | Re: heater unit |
this is the vacuum idea with the hole in the side http://www.izook.com/tech/samurai/body/ ... rclean.htm |
|
| Author: | want33s [ Mon Nov 02, 2009 12:52 am ] |
| Post subject: | Re: heater unit |
Pulling the whole dash out isn't anywhere near as hard as you'd think. Disconnect heater hoses ion engine bay side of firewall. Undo the nut near the hoses in engine bay. Fold the windscreen down and undo the 4 screws. Disconnect the brake rod from the pedal. Undo the wiring plugs behind the glovebox. Undo the heater tap cable in engine bay. Undo steering flexi joint at steering box. Undo the bolts that hold the pipe bar to body under each side of dash and it'll come out. If I've missed something don't blame me... You'll work it out. |
|
| Author: | mcwilly [ Mon Nov 02, 2009 4:44 pm ] |
| Post subject: | Re: heater unit |
decided the easiest way was to disconnect drain hoses and get the hose out and flush the water through from outside vent which washed all the mud out works good so far |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|