auszookers.com
https://auszookers.com/forum/

Dint on dear bumper - PROBLEM!
https://auszookers.com/forum/viewtopic.php?f=5&t=7807		 Page 1 of 1
Author:  vitz97 [ Mon Nov 09, 2009 1:59 am ]
Post subject:  Dint on dear bumper - PROBLEM!
I was at uni the other day and walked out to notice my car was slightly forward (parked) - was really odd. Looked around the rear bumper and realised some idiot back into me (most likely another 4WD with a hard rear bumper). No major damange thank god because the idiot didnt stick around and wait for me!

Anyway, I just went to open my back door and i couldnt open it. When the idiot backed into me, the plastic bumper had no where else to go but bent upwards and is pretty much blocking me from opening the rear door. Is there any way I can remove the bump myself?

*sorry if you cant see properly*
Image
Image
Author:  bigrig91 [ Mon Nov 09, 2009 2:02 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
hair dryer and a hammer will do it. :twisted:
Author:  Scrawny [ Mon Nov 09, 2009 2:05 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
Take the bumper off and make a tube bar for it :twisted:
Author:  Joe [ Mon Nov 09, 2009 2:07 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
bigrig91 wrote:
hair dryer and a hammer will do it. :twisted:


x2
Author:  Junior_91 [ Mon Nov 09, 2009 2:13 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
ScrawnC wrote:
Take the bumper off and make a tube bar for it :twisted:


x2
Author:  vitz97 [ Mon Nov 09, 2009 2:16 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
joseph wrote:
bigrig91 wrote:
hair dryer and a hammer will do it. :twisted:


x2


Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:
ScrawnC wrote:
Take the bumper off and make a tube bar for it :twisted:


x2


Would love to but im somewhat useless with materials and lack of tools.
Author:  steak_knife [ Mon Nov 09, 2009 2:30 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
vitz97 wrote:
joseph wrote:
bigrig91 wrote:
hair dryer and a hammer will do it. :twisted:


x2


Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

[quote="Junior_91"]

Just hit with a hammer then!! :wink:


You have a sister?? :lol:
Author:  coilyzook [ Mon Nov 09, 2009 2:44 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
nah take the bumper off, boil the jug and pour hot water into it, let it heat up and then pour the water out and then go at it with a hammer

i did that the other day with my coily's front bumper and it worked a charm :)
Author:  bigrig91 [ Mon Nov 09, 2009 2:46 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy :)
:P
Author:  Saam [ Mon Nov 09, 2009 2:50 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
take it apart straighten the bracket behind, then borrow a heat gun and watch it pop back out
Author:  steak_knife [ Mon Nov 09, 2009 2:57 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
Saam wrote:
take it apart straighten the bracket behind, then borrow a heat gun and watch it pop back out


That sound great saam, but where's the HAMMER!!!!! :twisted:
Author:  atari4x4 [ Mon Nov 09, 2009 3:24 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
bigrig91 wrote:
i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy :)
:P


will it fit a vitara? :roll:
Author:  steak_knife [ Mon Nov 09, 2009 3:26 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
atari4x4 wrote:
bigrig91 wrote:
i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy :)
:P


will it fit a vitara? :roll:


:roll: You call me a post whore!! :roll:
Author:  atari4x4 [ Mon Nov 09, 2009 3:41 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
steknig wrote:
atari4x4 wrote:
bigrig91 wrote:
i have a really good looking and practical rear bumper here for sale if your keen.,polished alloy :)
:P


will it fit a vitara? :roll:


:roll: You call me a post whore!! :roll:


you are the one & only post whore, aka quote master steknife.... pompoms
Author:  11_evl [ Mon Nov 09, 2009 11:11 am ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
steknig wrote:
vitz97 wrote:
joseph wrote:
bigrig91 wrote:
hair dryer and a hammer will do it. :twisted:


x2


Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:

Just hit with a hammer then!! :wink:


You have a sister?? :lol:


you can use her straightener to fix your bumper!!!
Author:  vitz97 [ Mon Nov 09, 2009 7:53 pm ]
Post subject:  Re: Dint on dear bumper - PROBLEM!
11_evl wrote:
steknig wrote:
vitz97 wrote:
joseph wrote:
bigrig91 wrote:
hair dryer and a hammer will do it. :twisted:


x2


Shame I got no hair dryer - How is it possible my sister doesn't have a hair dryer but has a straightener?

Junior_91 wrote:

Just hit with a hammer then!! :wink:


You have a sister?? :lol:


you can use her straightener to fix your bumper!!!


Classic! I used hot water and broke the head of the hammer (although it was very old) - slipped straight off, slightly missing my head! Some minor damage under. Ill take the bumper off and post up some pics
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/