| auszookers.com https://auszookers.com/forum/ |
|
| Keeping it water tight https://auszookers.com/forum/viewtopic.php?f=5&t=7900 |
Page 1 of 1 |
| Author: | Bugsta [ Thu Nov 12, 2009 4:24 am ] |
| Post subject: | Keeping it water tight |
Now that I have a 50mm body lift in the Jim, there is of course a gaping hole around the gear stick. I really should think about sealing this up. An idea I just had is to source some soft/flexible rubber sheeting that will stretch from around the body hole to around the top of the gearbox hole (maybe a zip tie will do this). Then using either screws or rivets and some appropriate silastic, and perhaps a metal surround strap... fasten that bitch down. Any other possibilities? |
|
| Author: | 89_tintop [ Thu Nov 12, 2009 5:51 am ] |
| Post subject: | Re: Keeping it water tight |
You can get universal rubber gear shift boots ... I seen them the other day at my local nut and bolt shop... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|