Does anyone know if the cam gears are the same between a G13BA and G16B. I want to put the G13BA gear onto the G16B. Any info would be helpful
| auszookers.com https://auszookers.com/forum/ |
|
| G16B Cam gear same as G13BA? https://auszookers.com/forum/viewtopic.php?f=5&t=8004 |
Page 1 of 1 |
| Author: | Tarmo [ Mon Nov 16, 2009 6:33 pm ] |
| Post subject: | G16B Cam gear same as G13BA? |
Does anyone know if the cam gears are the same between a G13BA and G16B. I want to put the G13BA gear onto the G16B. Any info would be helpful
|
|
| Author: | shep [ Mon Nov 16, 2009 6:49 pm ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
later g13 might be ok but if you only have 4 crank pulley bolts on the g13 then no. on the g13 if it has 4 pulley bolts it has a square tooth belt and the g16 has a round tooth belt. |
|
| Author: | Tarmo [ Mon Nov 16, 2009 10:12 pm ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
Just checked the g13 and the pulley has a round tooth belt so it should be ok hopefully 
|
|
| Author: | steak_knife [ Tue Nov 17, 2009 12:05 am ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
Tarmo wrote: Just checked the g13 and the pulley has a round tooth belt so it should be ok hopefully
Are you using the harness & ecu from the Vitt? If so, what are you doing with the 1.3 & harness? |
|
| Author: | Mugwui [ Tue Nov 17, 2009 3:16 am ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
steknig wrote: Are you using the harness & ecu from the Vitt? If so, what are you doing with the 1.3 & harness? He's bought my set up Stek!!!! so yes, he is using the vit kit. |
|
| Author: | steak_knife [ Tue Nov 17, 2009 3:25 am ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
Mugwui wrote: steknig wrote: Are you using the harness & ecu from the Vitt? If so, what are you doing with the 1.3 & harness? He's bought my set up Stek!!!! so yes, he is using the vit kit. Got a mate that wants Efi, could sell if he wanted. |
|
| Author: | Tarmo [ Tue Nov 17, 2009 11:00 am ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
steknig wrote: Mugwui wrote: steknig wrote: Are you using the harness & ecu from the Vitt? If so, what are you doing with the 1.3 & harness? He's bought my set up Stek!!!! so yes, he is using the vit kit. Got a mate that wants Efi, could sell if he wanted. Well the g13 will be minus a sump, oil pick up and now cam gear but its carby so why would your mate want it? |
|
| Author: | steak_knife [ Tue Nov 17, 2009 11:20 pm ] |
| Post subject: | Re: G16B Cam gear same as G13BA? |
Tarmo wrote: steknig wrote: Mugwui wrote: steknig wrote: Are you using the harness & ecu from the Vitt? If so, what are you doing with the 1.3 & harness? He's bought my set up Stek!!!! so yes, he is using the vit kit. Got a mate that wants Efi, could sell if he wanted. Well the g13 will be minus a sump, oil pick up and now cam gear but its carby so why would your mate want it? cause I'm brain dead, Thort it was a Jim    
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|