| auszookers.com https://auszookers.com/forum/ |
|
| engine work https://auszookers.com/forum/viewtopic.php?f=5&t=8025 |
Page 1 of 1 |
| Author: | BUZOOKA [ Tue Nov 17, 2009 2:26 pm ] |
| Post subject: | engine work |
im rebuildinh my motor some time in the next couple of months and have decided to boar(spelling) the engine out about 40thou my brothers idea just to get some extra out of the little motor just wondering if anyone else has done it and how much more power/ torque did u get ?? CHEERS ZOOKA |
|
| Author: | BlueSuzy [ Tue Nov 17, 2009 2:31 pm ] |
| Post subject: | Re: engine work |
BUZOOKA wrote: I'm rebuilding my motor some time in the next couple of months and have decided to bore the cylinders out about 40thou. Its my brothers idea as i just want to get some extra out of the little pip squeak motor. I am just wondering if anyone else has done it and how much more power did u get ??
CHEERS ZOOKA I wouldn't bother. Just hone the cylinders and rebuild. Otherwise. 1.6efi. 
|
|
| Author: | Rusho [ Tue Nov 17, 2009 2:41 pm ] |
| Post subject: | Re: engine work |
BlueSuzy wrote: BUZOOKA wrote: I'm rebuilding my motor some time in the next couple of months and have decided to bore the cylinders out about 40thou. Its my brothers idea as i just want to get some extra out of the little pip squeak motor. I am just wondering if anyone else has done it and how much more power did u get ?? CHEERS ZOOKA I wouldn't bother. Just hone the cylinders and rebuild. Otherwise. 1.6efi. x2 Any work you do will be almost a waste of good $$ as it will probably go unnoticed on such a tiny mill. Just my opinion. Others might disagree. A cam and carby work might make a small difference. |
|
| Author: | BUZOOKA [ Tue Nov 17, 2009 2:45 pm ] |
| Post subject: | Re: engine work |
not wasting more money than i have to with buying a 1.6 means i gotta buy the motor then rebuild it if anythings wrong with it plus spend all my time tring to figure out the wires when i can just rebuild my motor and put a bit more grunt in to it |
|
| Author: | BlueSuzy [ Tue Nov 17, 2009 2:47 pm ] |
| Post subject: | Re: engine work |
Hire a constant tailwind. That will give you more power. |
|
| Author: | BUZOOKA [ Tue Nov 17, 2009 2:50 pm ] |
| Post subject: | Re: engine work |
this is tech chat plz keep ur sarcasm for the chat section plz 
|
|
| Author: | royce [ Tue Nov 17, 2009 2:55 pm ] |
| Post subject: | Re: engine work |
overboreing does little to increase power but if your pistons are worn and your bore is out of round (will be) then its an essential recon step get a cam and up the compression a bit for more go |
|
| Author: | BUZOOKA [ Tue Nov 17, 2009 3:05 pm ] |
| Post subject: | Re: engine work |
thanks royce instead of trying to push me t the 1.6 u actually gave me some advice thanks |
|
| Author: | gypsy [ Tue Nov 17, 2009 3:12 pm ] |
| Post subject: | Re: engine work |
mine is 40 over mild cam and rejet goes realy well worth the money |
|
| Author: | BlueSuzy [ Tue Nov 17, 2009 3:14 pm ] |
| Post subject: | Re: engine work |
I gave you tech. Your not reading. |
|
| Author: | BUZOOKA [ Tue Nov 17, 2009 3:30 pm ] |
| Post subject: | Re: engine work |
wats that on the tail wind i just need an inverter anda hairdryer for that 
|
|
| Author: | royce [ Tue Nov 17, 2009 4:47 pm ] |
| Post subject: | Re: engine work |
for ther cost of a rebuild on a 1.3 its not really worth it IF you can get a good efi engine, more power and will alst longer nayway |
|
| Author: | BUZOOKA [ Tue Nov 17, 2009 4:59 pm ] |
| Post subject: | Re: engine work |
thats the thing theres a big IF there |
|
| Author: | royce [ Tue Nov 17, 2009 5:08 pm ] |
| Post subject: | Re: engine work |
even Jimny motors arent to dear |
|
| Author: | bakerboy [ Tue Nov 17, 2009 5:47 pm ] |
| Post subject: | Re: engine work |
damaged vehicle auctions are where its at mate, can pick up a complete car with the 1.3 or 1.6 with computer etc between 500-700 bucks, then part the rest off and make some $ |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|