auszookers.com
https://auszookers.com/forum/

1.3l engine mounts
https://auszookers.com/forum/viewtopic.php?f=5&t=8117		 Page 1 of 1
Author:  SuziBlu [ Sat Nov 21, 2009 5:33 pm ]
Post subject:  1.3l engine mounts
gday folks, I repleced my 1.3l engine mounty, it lasted about 5 hours of use.

I have read somewhere here to use VN-VP I think, engine mounts.

Went into town today, and had a look, nothing at all in semblence to a 1.3l engine mount, obviously I am mistaken, did a search here, and, im useless at searches, doh.

What engine mount to use.

I spoke to a online seller, and he says that the 1.6l is far more heavy duty than a 1.3l, a friend has a vitara with a 1.6l, and they look the same, should I use one of these.

$25 compared to $64, cost is not really an issue, and if the part is a one time buy, cost is irrelavent.

Suggestions anyone please ?
Author:  atari4x4 [ Sat Nov 21, 2009 5:43 pm ]
Post subject:  Re: 1.3l engine mounts
have a search, I think the sierra guys are using VL commy engine mounts.
Author:  SuziBlu [ Sat Nov 21, 2009 5:48 pm ]
Post subject:  Re: 1.3l engine mounts
Blast, VL, I am hopeless at searches, and while I was in town, 45 mins away, I for some reason thought vn.

Thats for that.
Author:  31zook [ Sat Nov 21, 2009 5:49 pm ]
Post subject:  Re: 1.3l engine mounts
i think it's VL
Author:  SuziBlu [ Sat Nov 21, 2009 5:55 pm ]
Post subject:  Re: 1.3l engine mounts
Just had a look at VL, and they are not the ones I remember seeing, not that my memory is all that good, prolly seen after a few cold ones.

The ones I (think) remember were a floating round giant Oring sort of thing.

Any thoughts on using vitara mounts ?
Author:  1.6zook [ Sat Nov 21, 2009 6:24 pm ]
Post subject:  Re: 1.3l engine mounts
Heres a link for the VL engine mount upgrade

http://nbs4x4club.com/forum/index.php?topic=12172.0

sorry about using another clubs info but i couldnt find the AZ write up.

I still dont see how this works tho as the sierra engine mount has off set studs/bolts in the rubber mount mount , but the Vl one's seem to have the bolt straight through ( if u know what i mean )

Does this set up require the holes in the original suzuki 1.3 engine mounts to be redrilled or elongated or something ??
Author:  Fatzook [ Sat Nov 21, 2009 7:07 pm ]
Post subject:  Re: 1.3l engine mounts
definately VL. I have them on left and right sides in my ute.
Author:  SuziBlu [ Sat Nov 21, 2009 8:12 pm ]
Post subject:  Re: 1.3l engine mounts
Fatzook wrote:
definately VL. I have them on left and right sides in my ute.


Do I have to replace both or can I only replace the dud one. Not sure if they are the same hight.
Author:  just_cruizin [ Sat Nov 21, 2009 8:20 pm ]
Post subject:  Re: 1.3l engine mounts
6 cylinder nissan engine one, not the V8
Author:  atari4x4 [ Sat Nov 21, 2009 8:24 pm ]
Post subject:  Re: 1.3l engine mounts
in that NBS write up it also mentions VL AUTO mounts
Author:  Fatzook [ Sun Nov 22, 2009 12:04 am ]
Post subject:  Re: 1.3l engine mounts
atari4x4 wrote:
in that NBS write up it also mentions VL AUTO mounts


They are the same.

just replace the broken one.
Author:  SuziBlu [ Sun Nov 22, 2009 12:28 am ]
Post subject:  Re: 1.3l engine mounts
Sweet, the drivers side looks friggin hard to get to compared to the passengers side.
Author:  steak_knife [ Sun Nov 22, 2009 12:35 am ]
Post subject:  Re: 1.3l engine mounts
SuziBlu wrote:
Sweet, the drivers side looks friggin hard to get to compared to the passengers side.


Girl!! thay both easy! :roll: :roll:
Author:  SuziBlu [ Sun Nov 22, 2009 12:49 am ]
Post subject:  Re: 1.3l engine mounts
there is all this er, "stuff' over the drivers side mount.

hehe, get back to your luxo suzi an leave us plebs alone.
Author:  steak_knife [ Sun Nov 22, 2009 3:05 am ]
Post subject:  Re: 1.3l engine mounts
SuziBlu wrote:
there is all this er, "stuff' over the drivers side mount.

hehe, get back to your luxo suzi an leave us plebs alone.


Luxo's in the shop, I'm currently working on geting a pov pack high top rego'd :P :P

GV'S ROCK!!!!
Author:  alex [ Sun Nov 22, 2009 3:47 am ]
Post subject:  Re: 1.3l engine mounts
here ya go mate :wink:

http://www.auszookers.com/index.php?nam ... ine+mounts
Author:  SuziBlu [ Sun Nov 22, 2009 4:01 am ]
Post subject:  Re: 1.3l engine mounts
Thanks very much folks.

I found a set tonight on ebay, $49

Which way do people put them, U section on top or below. The link 1.6zook gave advise on either way, any for or against or just whats easy for whoever is doing it.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/