| auszookers.com https://auszookers.com/forum/ |
|
| Lift kit for Sierra SJ80 https://auszookers.com/forum/viewtopic.php?f=5&t=8186 |
Page 1 of 1 |
| Author: | Ludi [ Tue Nov 24, 2009 7:28 pm ] |
| Post subject: | Lift kit for Sierra SJ80 |
Hi all. I have been told by several suspension people that 35mm is the highest lift I can put on my Sierra, however, I have seen pictures of other Sierras on this forum who obviously are sitting much higher than that. Is there a kit available that will allow me to go to say, 60mm??? |
|
| Author: | Ridge [ Tue Nov 24, 2009 7:57 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
Yes but it wont all be suspension. 35-40mm sus lift and a 2" body lift. If you want more you can get coil spacers, these will only fit if you have extended front struts. here is a link of my coily http://www.auszookers.com/index.php?nam ... pic&t=5887 or if you can fab stuff have a look at saam's build. |
|
| Author: | v.w.dave [ Tue Nov 24, 2009 9:28 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
Check with your local RTA what you can register before you do anything. Here in NSW it was 6' sus. 2' Bl and as of October this year it is now 4' sus . 2'Bl but if you dont care about the fuzz you could do Bl Spring overs and shackles and then big springs and be around 12 inches up there. |
|
| Author: | Ridge [ Tue Nov 24, 2009 10:20 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
you cant fit extended shackles on a coily |
|
| Author: | 31zook [ Tue Nov 24, 2009 10:45 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
Ridge wrote: you cant fit extended shackles on a coily
|
|
| Author: | v.w.dave [ Tue Nov 24, 2009 11:13 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
Hmmm true I was just yahh I was a dumb ass hahaha I didnt look at that hmmm |
|
| Author: | v.w.dave [ Tue Nov 24, 2009 11:14 pm ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
HAHAHAH or spring overs hahahahah hmmm forget I said anything hahaha I have my finger and my thumb in the shape of a L on my forehead hahahha |
|
| Author: | jonno_racing [ Wed Nov 25, 2009 12:24 am ] |
| Post subject: | Re: Lift kit for Sierra SJ80 |
http://cgi.ebay.com.au/40mm-Suspension- ... 518e638dac have that in mine... and http://www.auszookers.com/index.php?nam ... pic&t=6186 thats the lift in mine and u end up with a coily something like this
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|