hey im taking more stuff into the motor shop tomorrow and i was asked for a harmonic balancer, is this it?
PS: mods are welcome to delete this once i have found out
| auszookers.com https://auszookers.com/forum/ |
|
| sierra's don't have a Harmonic balancer, + vit rad https://auszookers.com/forum/viewtopic.php?f=5&t=8190 |
Page 1 of 1 |
| Author: | 31zook [ Tue Nov 24, 2009 10:36 pm ] |
| Post subject: | sierra's don't have a Harmonic balancer, + vit rad |
hey im taking more stuff into the motor shop tomorrow and i was asked for a harmonic balancer, is this it?
PS: mods are welcome to delete this once i have found out
|
|
| Author: | lump_a_charcoal [ Tue Nov 24, 2009 10:50 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
Pretty sure it isn't, ones I have seen have vulcanised rubber seperating the inner from the outer, and look like a pie. |
|
| Author: | shep [ Tue Nov 24, 2009 11:01 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
that is a crank pulley of a g13. i dont thing that g series motors had a harmonic balancer. steaknife will know for sure but. 
|
|
| Author: | gypsy [ Tue Nov 24, 2009 11:11 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
they dont have one but that is what they will be after |
|
| Author: | royce [ Tue Nov 24, 2009 11:16 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
Are you getting the crank balanced? |
|
| Author: | 31zook [ Tue Nov 24, 2009 11:39 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
yes royce, crank, pistons, clutch, flywheel and the balancer (if it has one)... Why do you ask? |
|
| Author: | royce [ Tue Nov 24, 2009 11:57 pm ] |
| Post subject: | Re: Is this a Harmonic balancer? |
was the only reason I could think they would want it youll also want to take the bottom cambelt pulley and all the bolts that hold it together as well |
|
| Author: | 31zook [ Wed Nov 25, 2009 12:04 am ] |
| Post subject: | Re: Is this a Harmonic balancer? |
Oh good idea that would have been another trip, thanks
Also so i don't start another thread i have a Vit rad (the big one) and i can fit it without a BL aslong as a mount it low, it will be covered my my alloy bull bar so flying sticks arn't a problem. But i've heard that you can mount a rad too low, how low it too low? The top of the vit rad will sit about 15mm taller than a stock sierra one, but it drops down alot further... |
|
| Author: | royce [ Wed Nov 25, 2009 12:13 am ] |
| Post subject: | Re: sierra's don't have a Harmonic balancer, + vit |
as long as the filler is the highest point it doesnt matter how low it goes but having said that from factory the radiator cap isnt the lowest point so as long as its at least that high youll be fine |
|
| Author: | 31zook [ Wed Nov 25, 2009 12:59 am ] |
| Post subject: | Re: sierra's don't have a Harmonic balancer, + vit |
awesome i just couldn't figure out why no one else had done it this way...
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|