auszookers.com
https://auszookers.com/forum/

sj80 suspension
https://auszookers.com/forum/viewtopic.php?f=5&t=8232
Page 1 of 1

Author:  harvey01 [ Thu Nov 26, 2009 6:01 pm ]
Post subject:  sj80 suspension

I have a stock sj80 and was thinking about a lift down the track. do the Rancho 5000 Shocks fit up front.I know they have struts but it say's on snake racing that they fit front and rear?

Author:  lockdup [ Thu Nov 26, 2009 6:28 pm ]
Post subject:  Re: sj80 suspension

Saam..........

Author:  lump_a_charcoal [ Thu Nov 26, 2009 6:58 pm ]
Post subject:  Re: sj80 suspension

I have ranchos, they are poo I reckon...

Author:  Myles [ Thu Nov 26, 2009 6:58 pm ]
Post subject:  Re: sj80 suspension

Saams the maan :P

Author:  harvey01 [ Thu Nov 26, 2009 7:02 pm ]
Post subject:  Re: sj80 suspension

ok then thanks for your reply's

Author:  Ridge [ Thu Nov 26, 2009 7:21 pm ]
Post subject:  Re: sj80 suspension

harvey01 wrote:
I have a stock sj80 and was thinking about a lift down the track. do the Rancho 5000 Shocks fit up front.I know they have struts but it say's on snake racing that they fit front and rear?


in the rear they will but not in the front. the only extended front strut for the coily is made by ultima. you could get struts custom made to whatever size you want but it will be expensive. shocks are easy to get heaps of sizes available.

Author:  harvey01 [ Thu Nov 26, 2009 8:50 pm ]
Post subject:  Re: sj80 suspension

ok thanks for that mate how much would i be looking at for custom struts.

Author:  Rusho [ Thu Nov 26, 2009 10:23 pm ]
Post subject:  Re: sj80 suspension

Custom struts would run into a fair few hundred a pair, like ridge suggested, ultima off ebay.I run them and they are pretty good. Snake racing have had that up there for as long as I can remember. The complete kit off ebay is about $650 if I remember correctly, works a treat

Author:  Ridge [ Thu Nov 26, 2009 10:43 pm ]
Post subject:  Re: sj80 suspension

harvey01 wrote:
ok thanks for that mate how much would i be looking at for custom struts.


depends where you go and who you speak too. i went to pedders and was qouted $400 each for 2" struts. i guess the guy thought that because i was young he could rip me off.

Author:  harvey01 [ Thu Nov 26, 2009 11:07 pm ]
Post subject:  Re: sj80 suspension

yeah i have seen the lift on ebay. but i was after maybe a 3 inch lift. snake racing are meant too be coming up with a new lift kit for them that i read on another forum next year. any one know what lift is in that sj80 hardtop on there website?

Author:  Ranga96 [ Fri Nov 27, 2009 1:12 am ]
Post subject:  Re: sj80 suspension

Have a look at Suzistores www.suzistore.com.au/ SHOP ONLINE--Four Wheel Drives--SIERRA SJ80 COIL--SUSPENSION, Page 2, $895.00 Suspension Kit 35mm. TJM's are around a grand, 40mm lift (24mm lifted springs and a 15mm bush to make up the 39mm) (they call it 40) anything under 50mm doesn't need an engineers certificate in Q'ld anyway.

Author:  Rusho [ Fri Nov 27, 2009 1:26 am ]
Post subject:  Re: sj80 suspension

Ranga96 wrote:
anything under 50mm doesn't need an engineers certificate in Q'ld anyway.


Really...is that absolutely correct? I have 40mm on mine, was going to get a mod plate soon for body lift and the suspension that's all.

Cheers

Author:  Choppy [ Fri Nov 27, 2009 1:33 am ]
Post subject:  Re: sj80 suspension

Rusho81 wrote:
Ranga96 wrote:
anything under 50mm doesn't need an engineers certificate in Q'ld anyway.


Really...is that absolutely correct? I have 40mm on mine, was going to get a mod plate soon for body lift and the suspension that's all.

Cheers


pretty sure under 50mm is legal but the body lift wont be .... could be wrong

Author:  Ridge [ Fri Nov 27, 2009 7:01 am ]
Post subject:  Re: sj80 suspension

i spoke to an engineer and qld transport about my ute build and they said that a body lift is ok as long as it is approved by the transport department. you are allowed a suspension lift equal to 1/3 of the stock suspension travel either up or down. best idea is to call and check for yourself

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/