Hey guys
Just need some help with the is pic,
Im wanting to get the same size wheels as this pic but im not to sure on the width of the rim and size
any help will be good
Cheers
Keith
| auszookers.com https://auszookers.com/forum/ |
|
| Can someone Identify the wheel size ??? https://auszookers.com/forum/viewtopic.php?f=5&t=8233 |
Page 1 of 1 |
| Author: | IN2DEP [ Thu Nov 26, 2009 6:55 pm ] |
| Post subject: | Can someone Identify the wheel size ??? |
Hey guys Just need some help with the is pic, Im wanting to get the same size wheels as this pic but im not to sure on the width of the rim and size any help will be good Cheers Keith
|
|
| Author: | Hybrid [ Thu Nov 26, 2009 7:04 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
bet the tyre is a 31 x 12.5 inch thornbird. It's the only 12.5 inch tyre that I know of in a 31. Can't help with the rim though you'd just work back from the 12.5 inch width which I think is generally recommended to go on a minimum 8.5 inch rim. You'd want mega offset rims to clear your springs though unless you're running NT spacing. |
|
| Author: | Fatzook [ Thu Nov 26, 2009 7:19 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
They will be custom offset and 10" wide. Not sure on size tho. Could be as big as 17's. |
|
| Author: | Damo [ Thu Nov 26, 2009 8:37 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Hybrid wrote: bet the tyre is a 31 x 12.5 inch thornbird. It's the only 12.5 inch tyre that I know of in a 31. Can't help with the rim though you'd just work back from the 12.5 inch width which I think is generally recommended to go on a minimum 8.5 inch rim. You'd want mega offset rims to clear your springs though unless you're running NT spacing.
I agree on the tyre, and I reckon 15x10 rim with 2" backspace (-75 offset  )
|
|
| Author: | steve [ Thu Nov 26, 2009 8:58 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Back the truck up ! Have you been out 4wding yet? Why would you want rims this size? Are they going on standard diffs? How are you going to cover the tyres? |
|
| Author: | IN2DEP [ Thu Nov 26, 2009 9:33 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
steve wrote: Back the truck up !
Have you been out 4wding yet? Why would you want rims this size? Are they going on standard diffs? How are you going to cover the tyres? Yes i have !! And to cover the tyres, BUSHWACKER FLARES 6" WIDE Might not be the most experiensed 4WDriver but i know what mods can do to the car, (improve driveabilty in the right areas) and things i dont know ill find out while doing it just like most 4WDrivers have along the way I said i want them on my zook dosnt mean im getting them lol I just want to find out what size they are 
Like i said in one of my posts, my zook is goin to be a toy (TUFF ONE AT THAT)
|
|
| Author: | steve [ Thu Nov 26, 2009 9:43 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
IN2DEP wrote: (improve driveabilty in the right areas)
well i reckon if you still want to drive you car on the road it will be horrible 
|
|
| Author: | tanshi [ Thu Nov 26, 2009 9:43 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
they look like custom offset jobbies to me. 15x10s |
|
| Author: | 31zook [ Thu Nov 26, 2009 10:16 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Your wating your time and money, imo |
|
| Author: | shep [ Thu Nov 26, 2009 10:20 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
i recon that they are a 33" tyre as the car is spring over with extended shackles and i recon that they are at least 16 X 10 rims. |
|
| Author: | Fatzook [ Thu Nov 26, 2009 10:55 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
IN2DEP wrote: steve wrote: Back the truck up ! Have you been out 4wding yet? Why would you want rims this size? Are they going on standard diffs? How are you going to cover the tyres? Yes i have !! And to cover the tyres, BUSHWACKER FLARES 6" WIDE Dot some bad news for ya. 6" flares won't be enough to cover that sort of offset matey. I have 15x10's with 4.5" backspace and -47 offset and 6" bushwackers don't cover my tyres. The rims in that pic have another 2" on mine, so you would need more like 8-9" of flare! Thats way too much to be driven on the street. |
|
| Author: | 31zook [ Thu Nov 26, 2009 11:04 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
It looks like 33x14.5s on 10's, they handle like a boat btw |
|
| Author: | shep [ Thu Nov 26, 2009 11:18 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
if ya had the power to turn them they would be great on the floodplains up here. |
|
| Author: | SuperRoo [ Thu Nov 26, 2009 11:22 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
IN2DEP wrote: Hey guys
Just need some help with the is pic, Im wanting to get the same size wheels as this pic but im not to sure on the width of the rim and size any help will be good Cheers Keith Drop him an email and ask him. ROCKCRAWLER.com |
|
| Author: | IN2DEP [ Fri Nov 27, 2009 4:15 am ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Looks tuff tho 
What would be the widest i can go with the 6"flares ?? but nothing over a 32" ?? I cant email him, i got the pic of google images, but his from the states but i backed track the pic to this other zook web site |
|
| Author: | SuperRoo [ Fri Nov 27, 2009 8:06 am ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
IN2DEP wrote: Looks tuff tho What would be the widest i can go with the 6"flares ?? but nothing over a 32" ?? I cant email him, i got the pic of google images, but his from the states but i backed track the pic to this other zook web site SuperRoo wrote:
Did you look at the link I provided above with his email address, Instant Messenger, website link and his nick name??? |
|
| Author: | Hybrid [ Fri Nov 27, 2009 1:11 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Quote: Modifications
Suspension Lift: SPOA w/ 1" shackles Rear Axle: Stock Front Axle: Stock Lockers: rear spool Gears: 3.73 Wheels: Cheepo Steel Tires: 31x12.5" swamper t-birds Shocks: Doesch tech 31 x 12.5 winner! I know my gay tyres. 
|
|
| Author: | IN2DEP [ Fri Nov 27, 2009 2:58 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
SuperRoo wrote: SuperRoo wrote: Did you look at the link I provided above with his email address, Instant Messenger, website link and his nick name??? How the hell did you find that lol, ive been trying to find more pics of his zook and more info on for ages lol thats awsome cheers guys thanks for help
|
|
| Author: | TASSIETOYUKI [ Fri Nov 27, 2009 4:19 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Hmm.. I would have bet on a bigger rim than a 15" looks to have a very shallow sidewall. May be an optical illusion due to the tire width though.. |
|
| Author: | Scrawny [ Fri Nov 27, 2009 4:43 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
TASSIETOYUKI wrote: Hmm.. I would have bet on a bigger rim than a 15" looks to have a very shallow sidewall. May be an optical illusion due to the tire width though..
Doesn't say 15" does it? I'd say more like 17" |
|
| Author: | TASSIETOYUKI [ Fri Nov 27, 2009 4:48 pm ] |
| Post subject: | Re: Can someone Identify the wheel size ??? |
Interco only list the 31 x 12.5 in a 15" rim on there website TSL Thornbird |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|