I have reused them thousand's of time's, unless you damaged it you should be fine.
| auszookers.com https://auszookers.com/forum/ |
|
| Internal Parts for G13B 92 Transfer Case https://auszookers.com/forum/viewtopic.php?f=5&t=8236 |
Page 1 of 1 |
| Author: | barkyman [ Thu Nov 26, 2009 9:01 pm ] |
| Post subject: | Internal Parts for G13B 92 Transfer Case |
Hi all, I am new to this site but need some info. I have a 1992 Sierra with springs, I am rebuilding the transfer case with the assistance of a mechanic. I have found the bearings and seal kit on line and have ordered it but am having some trouble in finding one of the internal parts. It is a sleeve or spacer that was pressed onto one of the shafts, it was up against one of the bearings. I was wondering if firstly anybody knows what it is called so when I ask about it people know what I am talking about and secondly where I can buy one. I am in Brisbane but am happy to buy online. Any help would be great. Regards Barkyman |
|
| Author: | lump_a_charcoal [ Thu Nov 26, 2009 11:11 pm ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
If you can tell me exactly which one it is, I may be able to send you a spare... |
|
| Author: | steak_knife [ Fri Nov 27, 2009 1:55 am ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
barkyman wrote: Hi all, I am new to this site but need some info. I have a 1992 Sierra with springs, I am rebuilding the transfer case with the assistance of a mechanic.
I have found the bearings and seal kit on line and have ordered it but am having some trouble in finding one of the internal parts. It is a sleeve or spacer that was pressed onto one of the shafts, it was up against one of the bearings. I was wondering if firstly anybody knows what it is called so when I ask about it people know what I am talking about and secondly where I can buy one. I am in Brisbane but am happy to buy online. Any help would be great. Regards Barkyman Did you cut it off? Why can't it be used again?? |
|
| Author: | 303zuke [ Fri Nov 27, 2009 4:06 am ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
In the following pic, the Suzuki part numbers for the spacers are: 12. Spacer 29962-80050 23. Washer 29959-80050 31. Retainer, Output 29143-80050 Numbers 5 and 30 are Shims for adjusting end play, part numbers vary according to thickness reqd. |
|
| Author: | barkyman [ Fri Nov 27, 2009 9:23 pm ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
Thanks for the image and the item numbers. No we had to use a press to push it off to get one of the bearings off and the guy who was helping me do it said that it would be a good idea to replace it if I can find it. From the exploded view I think it is number 31 (Retainer, Output). So if anybody knows where I can get any parts like this please let me know. Thanks. |
|
| Author: | lump_a_charcoal [ Sat Nov 28, 2009 1:02 am ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
I might have a second hand one if you want it... |
|
| Author: | steak_knife [ Sat Nov 28, 2009 1:40 am ] |
| Post subject: | Re: Internal Parts for G13B 92 Transfer Case |
I have reused them thousand's of time's, unless you damaged it you should be fine.
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|