| auszookers.com https://auszookers.com/forum/ |
|
| almost finished g13b-sierra, just need wiring or newcomputer https://auszookers.com/forum/viewtopic.php?f=5&t=8290 |
Page 1 of 1 |
| Author: | zookfun [ Sun Nov 29, 2009 6:48 pm ] |
| Post subject: | almost finished g13b-sierra, just need wiring or newcomputer |
Hi, I have an 85 sierra, just finished putting g13b gti engine in and everything else is done. Anyone in Adelaide that would want to wire it up for me? Also, would it be easier to get a microtec or similar- do these have all the plugs on them and just need to plug in? Everything on the engine is already plugged in to the gti loom, but am missing a couple of plugs... |
|
| Author: | Jamie [ Thu Dec 03, 2009 1:15 am ] |
| Post subject: | Re: almost finished g13b-sierra, just need wiring or newcomp |
zookfun can you get hold of a loom from a swift? thats the easiest, and chop and cut into existing sierra one. find a standard ECM, and send to a guy in adelaide, hes on the redlinegti forum, named gtaye, he will chip it sweet. will post some pics for you of mine. mine is an 82 model with an 85 body on it, bit of hard work modifying the chassis brackets etc! |
|
| Author: | jimbo_jones [ Thu Dec 03, 2009 3:09 am ] |
| Post subject: | Re: almost finished g13b-sierra, just need wiring or newcomp |
any good auto elect can do it for you I just got mine done about 3 weeks ago run stock computer then you dont have to dyno it |
|
| Author: | jonno_racing [ Thu Dec 03, 2009 3:52 am ] |
| Post subject: | Re: almost finished g13b-sierra, just need wiring or newcomp |
what mk gti motor is it??? |
|
| Author: | IN2DEP [ Thu Dec 03, 2009 3:54 am ] |
| Post subject: | Re: almost finished g13b-sierra, just need wiring or newcomp |
I sold My MK2 gti ecu but i still have all the wiring and shit |
|
| Author: | zookfun [ Wed Dec 09, 2009 7:05 am ] |
| Post subject: | Re: almost finished g13b-sierra, just need wiring or newcomp |
its an mk2. I want to get most of the wiring done so the auto electrician just has to connect a few wires.. Does anyone remember how they powered the computer? I guess it has to be through the green plug near the computer.. Also, I have no wires going to my coil. Where do these come from! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|