auszookers.com
https://auszookers.com/forum/

heavy duty clutch
https://auszookers.com/forum/viewtopic.php?f=5&t=8312		 Page 1 of 1
Author:  banga [ Mon Nov 30, 2009 10:50 am ]
Post subject:  heavy duty clutch
as i am bout to put a new motor in my vit soon i putting in a new clutch just wondering if it is ok to put in a heavier duty clutch or do they have problems like a wrx and blow the gearbox to pieces?
Author:  royce [ Mon Nov 30, 2009 12:33 pm ]
Post subject:  Re: heavy duty clutch
I will sell you an exedy thats done 4 months work for $50

even in that 4 months I hardly used it cause most of the time the clutch cable was broken or about to break, I went through 4 or 5 cables in this time

now I have a standard exedy clutch and no more problems
Author:  shep [ Mon Nov 30, 2009 12:43 pm ]
Post subject:  Re: heavy duty clutch
i had a H/D RPM clutch that was the same as royces. my 1.6 with stock 1.3
clutch gave no problems and i towed very heavy trailers.
Author:  steak_knife [ Tue Dec 01, 2009 1:18 am ]
Post subject:  Re: heavy duty clutch
Exceedy sports tuff h/d in my Gv & am on the 4th, 2 have been replaced under parts warranty but I had to supply the labor.

Go std or got a clutch made up, don't get a out of the box kit!!!
Author:  banga [ Tue Dec 01, 2009 10:20 am ]
Post subject:  Re: heavy duty clutch
i want to throw the whole kit in. i got a price on a pbr heavy duty for $162 or $125 for a std pbr from repco i almost fell over the best price i have ever got from repco. so thats the only problem with them the cable brakes cause i just got that fixed the car used mine as an earth and snapped it. there is a guy on the sunshine coast that puts new cable through the old liner for $40
Author:  PJ.zook [ Tue Dec 01, 2009 12:10 pm ]
Post subject:  Re: heavy duty clutch
I wouldnt bother with an HD clutch to be honest. In my 1.6 conversion im running teh same half worn standard sierra clutch that came with the 1.3, its never slipped on me.
Author:  royce [ Tue Dec 01, 2009 12:44 pm ]
Post subject:  Re: heavy duty clutch
banga wrote:
i want to throw the whole kit in. i got a price on a pbr heavy duty for $162 or $125 for a std pbr from repco i almost fell over the best price i have ever got from repco. so thats the only problem with them the cable brakes cause i just got that fixed the car used mine as an earth and snapped it. there is a guy on the sunshine coast that puts new cable through the old liner for $40


Every cable I broke broke the outer not the inner

they also shudder like buggery and are pretty annoying in traffic (for the 15 mins till the cable dies)
Author:  shep [ Tue Dec 01, 2009 12:47 pm ]
Post subject:  Re: heavy duty clutch
i was getting 5 or 6 gear changes and then busting the cable.
Author:  BlueSuzy [ Tue Dec 01, 2009 2:37 pm ]
Post subject:  Re: heavy duty clutch
Another vote for standard exedy. :D
Author:  steak_knife [ Tue Dec 01, 2009 11:18 pm ]
Post subject:  Re: heavy duty clutch
My 2nd clutch shuddered from first take of then the pressure plate started failing at 250km, lasted 7500km before it shat completely.
Author:  birko [ Wed Dec 02, 2009 12:09 am ]
Post subject:  Re: heavy duty clutch
Ive had a hd exedy for a while with no problems? Is ok for pressure as well?
Author:  royce [ Wed Dec 02, 2009 12:40 am ]
Post subject:  Re: heavy duty clutch
I think the common sierra one is fine

the vitara one might be ok in the earlier model but crap in the later version (different pedal setup)
Author:  greenzook89 [ Wed Dec 02, 2009 4:36 am ]
Post subject:  Re: heavy duty clutch
So just go standard exedy??
Author:  banga [ Wed Dec 02, 2009 10:50 am ]
Post subject:  Re: heavy duty clutch
will do thanks for that big help saved me some coin to
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/