| Author |
Message |
banga
Joined: Tue Nov 17, 2009 10:30 pm Posts: 668 Location: sunshine coast
|
 Posted: Mon Nov 30, 2009 10:50 am |
|
|
as i am bout to put a new motor in my vit soon i putting in a new clutch just wondering if it is ok to put in a heavier duty clutch or do they have problems like a wrx and blow the gearbox to pieces?
_________________ lseries 2" body lift king springs 27" boots and a
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Mon Nov 30, 2009 12:33 pm |
|
|
I will sell you an exedy thats done 4 months work for $50
even in that 4 months I hardly used it cause most of the time the clutch cable was broken or about to break, I went through 4 or 5 cables in this time
now I have a standard exedy clutch and no more problems
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Mon Nov 30, 2009 12:43 pm |
|
|
i had a H/D RPM clutch that was the same as royces. my 1.6 with stock 1.3
clutch gave no problems and i towed very heavy trailers.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Dec 01, 2009 1:18 am |
|
|
Exceedy sports tuff h/d in my Gv & am on the 4th, 2 have been replaced under parts warranty but I had to supply the labor.
Go std or got a clutch made up, don't get a out of the box kit!!!
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
banga
Joined: Tue Nov 17, 2009 10:30 pm Posts: 668 Location: sunshine coast
|
 Posted: Tue Dec 01, 2009 10:20 am |
|
|
i want to throw the whole kit in. i got a price on a pbr heavy duty for $162 or $125 for a std pbr from repco i almost fell over the best price i have ever got from repco. so thats the only problem with them the cable brakes cause i just got that fixed the car used mine as an earth and snapped it. there is a guy on the sunshine coast that puts new cable through the old liner for $40
_________________ lseries 2" body lift king springs 27" boots and a
|
|
|
|
 |
PJ.zook

az supporter
Joined: Sat Oct 24, 2009 10:30 pm Posts: 845 Location: Melbourne
|
 Posted: Tue Dec 01, 2009 12:10 pm |
|
|
I wouldnt bother with an HD clutch to be honest. In my 1.6 conversion im running teh same half worn standard sierra clutch that came with the 1.3, its never slipped on me.
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Tue Dec 01, 2009 12:44 pm |
|
banga wrote: i want to throw the whole kit in. i got a price on a pbr heavy duty for $162 or $125 for a std pbr from repco i almost fell over the best price i have ever got from repco. so thats the only problem with them the cable brakes cause i just got that fixed the car used mine as an earth and snapped it. there is a guy on the sunshine coast that puts new cable through the old liner for $40
Every cable I broke broke the outer not the inner
they also shudder like buggery and are pretty annoying in traffic (for the 15 mins till the cable dies)
|
|
|
|
 |
shep
Joined: Thu Mar 29, 2007 11:30 pm Posts: 14498 Location: Here there everywhere
Vehicle: A manly awesome man jimny
|
 Posted: Tue Dec 01, 2009 12:47 pm |
|
|
i was getting 5 or 6 gear changes and then busting the cable.
|
|
|
|
 |
BlueSuzy

az supporter
Joined: Sun May 04, 2008 11:30 pm Posts: 9716 Location: NSW
Vehicle: SJ51 LWB, SJ70 SWB
|
 Posted: Tue Dec 01, 2009 2:37 pm |
|
Another vote for standard exedy. 
_________________ BlueSuzy wrote: I'm over the G16b's.
|
|
|
|
 |
steak_knife

az supporter
Joined: Fri May 22, 2009 11:30 pm Posts: 21335 Location: Smart Ass Island
|
 Posted: Tue Dec 01, 2009 11:18 pm |
|
|
My 2nd clutch shuddered from first take of then the pressure plate started failing at 250km, lasted 7500km before it shat completely.
_________________ I used to be indecisive,
now I'm not so sure.....
|
|
|
|
 |
birko

az supporter
Joined: Sun Jun 07, 2009 11:30 pm Posts: 573 Location: Perth WA
|
 Posted: Wed Dec 02, 2009 12:09 am |
|
|
Ive had a hd exedy for a while with no problems? Is ok for pressure as well?
|
|
|
|
 |
royce

omnipotent being
Joined: Sun Jun 11, 2006 11:30 pm Posts: 17216 Location: Pluto
|
 Posted: Wed Dec 02, 2009 12:40 am |
|
|
I think the common sierra one is fine
the vitara one might be ok in the earlier model but crap in the later version (different pedal setup)
|
|
|
|
 |
greenzook89

az supporter
Joined: Sun Sep 06, 2009 11:30 pm Posts: 2591 Location: Ipswich
Vehicle: LJ80V-II, SJ40, SJ40T, RS415
|
 Posted: Wed Dec 02, 2009 4:36 am |
|
|
So just go standard exedy??
_________________ 31zook wrote: Makes me want something similar
|
|
|
|
 |
banga
Joined: Tue Nov 17, 2009 10:30 pm Posts: 668 Location: sunshine coast
|
 Posted: Wed Dec 02, 2009 10:50 am |
|
|
will do thanks for that big help saved me some coin to
_________________ lseries 2" body lift king springs 27" boots and a
|
|
|
|
 |
|