| auszookers.com https://auszookers.com/forum/ |
|
| EFI 1.3 info https://auszookers.com/forum/viewtopic.php?f=5&t=8358 |
Page 1 of 1 |
| Author: | esky [ Tue Dec 01, 2009 11:51 pm ] |
| Post subject: | EFI 1.3 info |
So its time to start freshening up my 1.3 and have some questions for the pro's. First up which headgaskets are recommended and which ones should I steer clear from? Standard plugs ok or should I use different ones? Are there any differences between carby and efi with the engine settings such as timing, plug gap, valve clearances ect? And where would be a goo place to take it for tuning? Im weary of general mechanincs and would want a place that knows their shit. Vince |
|
| Author: | want33s [ Tue Dec 01, 2009 11:56 pm ] |
| Post subject: | Re: EFI 1.3 info |
esky wrote: First up which headgaskets are recommended and which ones should I steer clear from? ACL are good Standard plugs ok or should I use different ones?Standard NGK or BOSCH will be fine Are there any differences between carby and efi with the engine settings such as timing, plug gap, valve clearances ect?NO And where would be a goo place to take it for tuning? Im weary of general mechanincs and would want a place that knows their shit. Sorry don't know anyone down that way but there's SFA to tune with a TBI setup. Set the plug gap and the timing and away you go. Vince |
|
| Author: | esky [ Wed Dec 02, 2009 2:58 am ] |
| Post subject: | Re: EFI 1.3 info |
that was easy, should have just messaged you first. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|