i downloaded that bopok
its HUGE
WILL TAKE ME LIKE 2 HOURS to find, and quicker ways.
thanks for the help boys
| auszookers.com https://auszookers.com/forum/ |
|
| Need help - replace my pinoin seal https://auszookers.com/forum/viewtopic.php?f=5&t=8415 |
Page 1 of 1 |
| Author: | Brocbeau [ Fri Dec 04, 2009 10:29 pm ] |
| Post subject: | Need help - replace my pinoin seal |
hello friendly zookers i have to replace my pinoin seal this weekend, apprently it has to be done up and put in with different tensions using a torque rench, i have all toold and a good head, all i need to know is measurements if they are not in my manul (i have not looked) haha, does any one know tensions? thanks Stekkyyyy?? were arre youu |
|
| Author: | Fatzook [ Fri Dec 04, 2009 10:31 pm ] |
| Post subject: | Re: Need help |
Stekky? |
|
| Author: | Scrawny [ Fri Dec 04, 2009 10:31 pm ] |
| Post subject: | Re: Need help |
If it's not in your manual then it will be in the download section on the left side on your screen. |
|
| Author: | Brocbeau [ Fri Dec 04, 2009 10:35 pm ] |
| Post subject: | Re: Need help |
left hand side of my screeen?? sorry i cant see it? |
|
| Author: | Scrawny [ Fri Dec 04, 2009 10:36 pm ] |
| Post subject: | Re: Need help |
Under "Main Menu", Downloads |
|
| Author: | Brocbeau [ Fri Dec 04, 2009 10:40 pm ] |
| Post subject: | Re: Need help |
Also will a 89 WT radiator fit in my 95? ASAP lol |
|
| Author: | Joe [ Fri Dec 04, 2009 10:44 pm ] |
| Post subject: | Re: Need help |
Brocbeau wrote: Also will a 89 WT radiator fit in my 95?
ASAP lol yep |
|
| Author: | Brocbeau [ Fri Dec 04, 2009 10:51 pm ] |
| Post subject: | Re: Need help |
thanks he told me 160 for a secondhand one, i said nah i got offered 180 for brand new. lol wtf :S hes like okay buy the new one im like okay mate.weirdd. |
|
| Author: | Brocbeau [ Fri Dec 04, 2009 11:00 pm ] |
| Post subject: | Re: Need help |
i downloaded that bopok
its HUGE WILL TAKE ME LIKE 2 HOURS to find, and quicker ways. thanks for the help boys |
|
| Author: | Ridge [ Fri Dec 04, 2009 11:31 pm ] |
| Post subject: | Re: Need help |
start with the contents page |
|
| Author: | Brocbeau [ Fri Dec 04, 2009 11:41 pm ] |
| Post subject: | Re: Need help |
Did And Done, it was in a radond section 180 pages in with a description and pis about 7cm down and 10 across,
thanks heaps boys, Case closed, 
|
|
| Author: | steak_knife [ Sat Dec 05, 2009 1:10 am ] |
| Post subject: | Re: Need help |
Fatzook wrote: Stekky?
Yes sweetie?? 
|
|
| Author: | want33s [ Sat Dec 05, 2009 1:13 am ] |
| Post subject: | Re: Need help |
Brocbeau wrote: Did And Done,
it was in a radond section 180 pages in with a description and pis about 7cm down and 10 across,thanks heaps boys, Case closed, For the sake of my poor tired brain could you read what you've typed and correct it BEFORE you click submit. 
|
|
| Author: | lump_a_charcoal [ Sat Dec 05, 2009 1:15 am ] |
| Post subject: | Re: Need help - replace my pinoin seal |
Yeah beer + your posts make no sense to me... |
|
| Author: | Brocbeau [ Sat Dec 05, 2009 1:56 am ] |
| Post subject: | Re: Need help |
want33s wrote: Brocbeau wrote: Did And Done, it was in a random section 180 pages in with a description and pis about 7cm down and 10 across,thanks heaps boys, Case closed, D For the sake of my poor tired brain could you read what you've typed and correct it BEFORE you click submit. if you dont understand i downloaded the book from this site and spent and hour looking for the part, telling me tensions sorry fullass |
|
| Author: | Brocbeau [ Sat Dec 05, 2009 7:38 pm ] |
| Post subject: | Re: Need help - replace my pinoin seal |
F##kn tight, woh tourque rench failed, rattle gun failed extended pipe failed have to talk it into old mans factory during the week lol myy gossh |
|
| Author: | 303zuke [ Sun Dec 06, 2009 12:07 am ] |
| Post subject: | Re: Need help - replace my pinoin seal |
If you're using a Rattle Gun on the pinion nut, you should have or make up a plate on a handle to bolt through the flange bolt holes to hold it fairly firm while you undo the nut. Just applying the handbrake to hold the rear axle and therefore the diff while apply rattle force will cause the pinion to repeatedly hammer the crown wheel and either fatigue or indent the gear faces. Have you unstaked the crimp on the pinion nut which sets into a keyway in the pinion? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|