auszookers.com
https://auszookers.com/forum/

Rear tailshaft compression
https://auszookers.com/forum/viewtopic.php?f=5&t=8473
Page 1 of 1

Author:  lump_a_charcoal [ Mon Dec 07, 2009 9:50 am ]
Post subject:  Rear tailshaft compression

How much compression or slip should be allowed on a rear tailshaft with the car sitting normally on flat ground?

Author:  BlueSuzy [ Mon Dec 07, 2009 1:15 pm ]
Post subject:  Re: Rear tailshaft compression

A better example would be a stock sierra. Need some measurements?

Author:  joeblow [ Mon Dec 07, 2009 5:18 pm ]
Post subject:  Re: Rear tailshaft compression

depends on tailshaft length, tailshaft angle and the distance the suspension compresses up to the bumpstops. you will need these measurements to get a rough idea.

Author:  11_evl [ Mon Dec 07, 2009 7:22 pm ]
Post subject:  Re: Rear tailshaft compression

my car sits pretty high with a fair bit of travel. i have about 1.5" of compression b4 it binds. it has not been a problem for me

Author:  lump_a_charcoal [ Mon Dec 07, 2009 10:28 pm ]
Post subject:  Re: Rear tailshaft compression

Talking to an old mechanic at work, he reckons there would be bugger all compression, as when the spring bends, it lengthens.
I reckon it would lengthen when the diff flexes down too...

Author:  BlueSuzy [ Tue Dec 08, 2009 2:39 pm ]
Post subject:  Re: Rear tailshaft compression

Hilux's are the opposite. They need alot of travel up front because of their shackle mountings also. Alot of my mates have popped the shafts out.

Suzy has never popped a shaft. Hmm. I wonder how much is left in flexing though? :?

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/