4j for everything else, only cause I like the smell
| auszookers.com https://auszookers.com/forum/ |
|
| sump gasket sierra - gasket or glue? https://auszookers.com/forum/viewtopic.php?f=5&t=8537 |
Page 1 of 1 |
| Author: | coilyzook [ Thu Dec 10, 2009 3:27 am ] |
| Post subject: | sump gasket sierra - gasket or glue? |
i need one and want to know if i could use the gasket stuff that comes in a tube |
|
| Author: | steak_knife [ Thu Dec 10, 2009 3:40 am ] |
| Post subject: | Re: sump gasket sierra |
http://www.suzistore.com.au/shopexd.asp?id=131 Cost about the same as a tube of 3bond, you can just "glue" it on with 3bond or silicon, but that's what you are doing, gluing it on. If it leak's again it will just be harder to get off to fix the original problem. |
|
| Author: | coilyzook [ Thu Dec 10, 2009 3:43 am ] |
| Post subject: | Re: sump gasket sierra |
great thanks stek |
|
| Author: | steak_knife [ Thu Dec 10, 2009 4:15 am ] |
| Post subject: | Re: sump gasket sierra |
coilyzook wrote: great thanks stek
No worry's. |
|
| Author: | PJ.zook [ Thu Dec 10, 2009 12:03 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
Glue, just use glue (automotive silicone) on everything unless it specifically requires a gasket like the head, or somewhere which uses thickness of gasket as part of its clearancing. |
|
| Author: | Scrawny [ Thu Dec 10, 2009 12:06 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
PJ.zook wrote: Glue, just use glue (automotive silicone) on everything unless it specifically requires a gasket like the head, or somewhere which uses thickness of gasket as part of its clearancing.
This is asking for trouble. I use sealant for sumps but dry gaskets for everything else |
|
| Author: | royce [ Thu Dec 10, 2009 12:21 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
4j for everything else, only cause I like the smell
|
|
| Author: | jdk81 [ Thu Dec 10, 2009 3:24 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
I use the gaskets and a very light coat of high temp gasket silicone. That way it give great sealing, without being a total prick to pry off next time. For things without gaskets i.e. diff, prying them off is a real pain in the bum. |
|
| Author: | shep [ Thu Dec 10, 2009 9:16 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
gaskets with permatex non hardening sealant. |
|
| Author: | Dee [ Thu Dec 10, 2009 9:28 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
x2 shep. gaskets with a smear of ultra grey |
|
| Author: | money_killer [ Fri Dec 11, 2009 1:27 am ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
i use silcone for eveyting 
|
|
| Author: | steak_knife [ Fri Dec 11, 2009 3:59 am ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
money_killer wrote: i use silcone for eveyting
So do I but not in place of a gasket if one is available, 3/4's of a modern ally eng is sealed with silicone, but thay are two machined surfaces, not tin on ally or tin on cast ect ect ect Use silicone as an aid, not the fix (unless thay boobies)  
|
|
| Author: | Rockhopper [ Fri Dec 11, 2009 10:47 am ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
I thought manufacturers like Toyota only use silicone for their sump gaskets. I did one only the other day. Even though it was a forklift, it had the same engine as a Toyota Dyna in it. Mind you, I don't know how Toyota produces it's sump gasket silicone. Once it sets, it becomes a job and a half to seperate the sump from the block again without damaging the lip of the sump. Have done a tb42 Nissan motor the same way too. |
|
| Author: | steak_knife [ Fri Dec 11, 2009 11:02 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
tb42? I try not to!! I've broken a couple of sump's on swift's getting them off, but I was replacing them anyway due to the sump hitting something harder.. zd30 I've helped with a couple of time's, try not to tho. Just about all the newer Suzuki eng's are mainly 3 bond gasket's, well sump & timing cover. But as said before, two machined surface's. |
|
| Author: | jimbo_jones [ Sat Dec 12, 2009 1:04 am ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
Dee wrote: x2 shep.
gaskets with a smear of ultra grey thats all I used on my gti sump 
|
|
| Author: | BenT [ Sat Dec 12, 2009 4:59 pm ] |
| Post subject: | Re: sump gasket sierra - gasket or glue? |
They come sealed with Silicon from the factory, and there is no sump gasket in the parts catalogue... Suzuki Factory Service Manual wrote: Oil Pan
1) Clean mating surfaces of oil pan and cylinder block. Remove oil, old sealant, and dusts from mating surfaces. After cleaning, apply silicon type sealant to oil pan mating surface continuously as shown in Fig. 3-6-23. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|