So why would you put the Clutch disc on the gearbox OUTPUT shaft??
| auszookers.com https://auszookers.com/forum/ |
|
| '90 W/T - Is my g/box input shaft 18 or 20 spline https://auszookers.com/forum/viewtopic.php?f=5&t=8689 |
Page 1 of 1 |
| Author: | Red_October [ Thu Dec 17, 2009 1:14 am ] |
| Post subject: | '90 W/T - Is my g/box input shaft 18 or 20 spline |
I'm soon to be replacing the clutch and need to know if my gearbox has an 18 or 20 spline on the input shaft. It's to suit a '90 W/T Sierra with original g/box. Cheers, Jimmy |
|
| Author: | losfer [ Thu Dec 17, 2009 1:37 am ] |
| Post subject: | Re: '90 W/T Sierra - Is my g/box output shaft 18 or 20 |
FFS , the amount of people that get asked that by spare parts monkeys with incorrect catalogues is amazing , get the monkeys to crossreference the part number SZ330 , this is the kit you are after . |
|
| Author: | Red_October [ Thu Dec 17, 2009 1:44 am ] |
| Post subject: | Re: '90 W/T Sierra - Is my g/box output shaft 18 or 20 |
Clutch Industries and Exedy both list two different clutches for my '90 W/T Sierra (18 & 20 spline) in their catalogues. Same thing goes for the water pump as well. It would appear that 1990 was a transitional period for the Sierra? Cheers losfer. I'll pass the info on. If someone knows which one i've got i'm still all ears. |
|
| Author: | 303zuke [ Thu Dec 17, 2009 2:13 am ] |
| Post subject: | Re: '90 W/T Sierra - Is my g/box output shaft 18 or 20 |
So why would you put the Clutch disc on the gearbox OUTPUT shaft??
|
|
| Author: | Red_October [ Thu Dec 17, 2009 2:22 am ] |
| Post subject: | Re: '90 W/T Sierra - Is my g/box input shaft 18 or 20 s |
input 
|
|
| Author: | 31zook [ Thu Dec 17, 2009 9:44 am ] |
| Post subject: | Re: '90 W/T - Is my g/box input shaft 18 or 20 spline |
lol i think it's to do with yout motor number, wether its a G13A or a G13B |
|
| Author: | Red_October [ Thu Dec 17, 2009 12:03 pm ] |
| Post subject: | Re: '90 W/T - Is my g/box input shaft 18 or 20 spline |
nah each clutch suits a particular spline that matches the input shaft on the gearbox. I have a G13BA. There are these two options: 18Spline/19.3OD 20Spline/22.4OD It's not urgent as I have a part number from losfer to cross reference but i'm curious nonetheless. |
|
| Author: | royce [ Thu Dec 17, 2009 12:20 pm ] |
| Post subject: | Re: '90 W/T - Is my g/box input shaft 18 or 20 spline |
you have the box with the inspection bung correct? then its the same one as the earlier 1.3 narrow tracks |
|
| Author: | Hybrid [ Thu Dec 17, 2009 12:49 pm ] |
| Post subject: | Re: '90 W/T - Is my g/box input shaft 18 or 20 spline |
Both my gboxes have the inspection bungs. One is a 89 one is a 91. 89 is 18 spline 91 is 20 spline. Don't bother guessing. Get it out. Its a gamble otherwise. I've still got an unused 18 spline sitting at home from when ripco told me thats what my 91 needed. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|