Rockhopper wrote:
I heard Athol is'nt engineering 31's on a zook no more. Think I read it somewhere on this forum
i wrote that
| auszookers.com https://auszookers.com/forum/ |
|
| engineering?... https://auszookers.com/forum/viewtopic.php?f=5&t=8913 |
Page 1 of 1 |
| Author: | nath_89 [ Wed Dec 30, 2009 3:18 am ] |
| Post subject: | engineering?... |
does any one know if i was to put a 2 inch suspension lift and a 2 possibly 3 inch bodylift would cost to get engineered?? |
|
| Author: | kirstyandgrace [ Wed Dec 30, 2009 4:49 am ] |
| Post subject: | Re: engineering?... |
Just your first born |
|
| Author: | v.w.dave [ Wed Dec 30, 2009 4:55 am ] |
| Post subject: | Re: engineering?... |
I wouldn't bother. But also don't go over 2 BL. Enganeers dont like over 2BL on sierras. If you are running 30s with 2 bl 2 spring you wont be bothered by the po po. But to answer your question they all charge differently. Most will charge between 300 too 450 for the mod plate and inspection for the first part you want engineered the 25 too 100 per other item. SO if you had a BL and spring lift with different steering wheel it would be. $300 for the springs $25 for the BL $25 for the wheel |
|
| Author: | Rockhopper [ Wed Dec 30, 2009 10:50 am ] |
| Post subject: | Re: engineering?... |
shit, where's your engineer Dave? I've been quoted around the $1000 mark to have my Sierra engineered. All it's got is 31's with 2" spring and a 2" bodylift. |
|
| Author: | lockdup [ Wed Dec 30, 2009 1:55 pm ] |
| Post subject: | Re: engineering?... |
I got mine engineered a couple of months back: SPOA, 2" Body Lift, Bullbar (Custom), rear led lights, Steering wheel, exhaust and rear seats remover for $800. He took a few tests and that was all |
|
| Author: | lump_a_charcoal [ Wed Dec 30, 2009 2:52 pm ] |
| Post subject: | Re: engineering?... |
Athol can't be beaten for price, and he is by the book. |
|
| Author: | 31zook [ Wed Dec 30, 2009 3:44 pm ] |
| Post subject: | Re: engineering?... |
yeah i used athol, $250 for the first issue, $50 for everything after that, but i got mine done almost one year ago... |
|
| Author: | Rockhopper [ Wed Dec 30, 2009 7:46 pm ] |
| Post subject: | Re: engineering?... |
I heard Athol is'nt engineering 31's on a zook no more. Think I read it somewhere on this forum |
|
| Author: | appsie [ Wed Dec 30, 2009 8:58 pm ] |
| Post subject: | Re: engineering?... |
Athol does seem to be good with price and as said above well known and by the book.My dad used him with no complaints i used another engineer and it was $700 for rims,tyres,seats,g16b,exhaust,body and suspension lift. |
|
| Author: | 31zook [ Wed Dec 30, 2009 11:00 pm ] |
| Post subject: | Re: engineering?... |
Rockhopper wrote: I heard Athol is'nt engineering 31's on a zook no more. Think I read it somewhere on this forum
i wrote that
|
|
| Author: | v.w.dave [ Wed Dec 30, 2009 11:02 pm ] |
| Post subject: | Re: engineering?... |
Rockhopper wrote: shit, where's your engineer Dave? I've been quoted around the $1000 mark to have my Sierra engineered. All it's got is 31's with 2" spring and a 2" bodylift.
Was that with free lube???? or was that extra? |
|
| Author: | Rockhopper [ Thu Dec 31, 2009 1:35 am ] |
| Post subject: | Re: engineering?... |
lube was extra, but it had sand in it. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|