| auszookers.com https://auszookers.com/forum/ |
|
| g13bb extractors? https://auszookers.com/forum/viewtopic.php?f=5&t=8998 |
Page 1 of 1 |
| Author: | andrew88 [ Mon Jan 04, 2010 9:42 pm ] |
| Post subject: | g13bb extractors? |
i've done some searching and i want to get 4-2-1 extractors for my jimny as it has 235/75/15 muddies and needs just a lil bit more low end tourqe. i have a g13bb motor in it. is it correct that the g16b extractor will bolt up or did i miss read something. ive tried to find the thread but i couldnt find it. cheers andrew |
|
| Author: | Ben_Sierra [ Mon Jan 04, 2010 9:52 pm ] |
| Post subject: | Re: g13bb extractors? |
I don't think extractors are gonna make the difference that you need to make it drive ok with the 29 Inch tyres. I think gearing is the answer... |
|
| Author: | andrew88 [ Mon Jan 04, 2010 10:01 pm ] |
| Post subject: | Re: g13bb extractors? |
i do realise that doing the gears would be more effective but thats not in my budget. i know it still will be a slug but surely it would perform a bit better than standard. |
|
| Author: | andrew88 [ Mon Jan 04, 2010 10:20 pm ] |
| Post subject: | Re: g13bb extractors? |
also would putting a set of g16b extractors loose power on a g13bb motor as the g16b is a 1.6? or do they both flow simular? it just is cheaper and easier to find g16b extractors thats all. |
|
| Author: | Mistaria81 [ Mon Jan 04, 2010 11:31 pm ] |
| Post subject: | Re: g13bb extractors? |
better off getting a set of extractor that suit the jimny. the g16 extractors won't fit properly as it dosen't bolt up to the jimny exhuast. either get a set made or buy them on ebay. Or try suzisport.com. they always have them in stock |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|