DMAC wrote:
Yep, slightly different setup but works in virtually the same way as mine does... the Ground pin on the headlight is permanent 12V.... looks a bit neater than mine too
| auszookers.com https://auszookers.com/forum/ |
|
| spoties wired in to hi beam https://auszookers.com/forum/viewtopic.php?f=5&t=9023 |
Page 1 of 1 |
| Author: | mudzookacoatsy [ Tue Jan 05, 2010 11:33 pm ] |
| Post subject: | spoties wired in to hi beam |
hey got sum spoties for xmas. how do u wire it in to the hi beam i could figure out how do do it .... plz help |
|
| Author: | atari4x4 [ Tue Jan 05, 2010 11:38 pm ] |
| Post subject: | Re: spoties wired in to hi beam |
have you had a look in the auszookers tech topics? http://www.auszookers.com/index.php?nam ... cle&sid=29 |
|
| Author: | Ben_Sierra [ Tue Jan 05, 2010 11:44 pm ] |
| Post subject: | Re: spoties wired in to hi beam |
atari4x4 wrote: have you had a look in the auszookers tech topics?
http://www.auszookers.com/index.php?nam ... cle&sid=29 That shows you how to rewire the whole lot (headlights, Hi beam and all) with new relays and the works. If you just wanna add spotties, this is more or less what I did (excuse dodgy quick MSpaint job) |
|
| Author: | mudzookacoatsy [ Tue Jan 05, 2010 11:49 pm ] |
| Post subject: | Re: spoties wired in to hi beam |
thanks mate didnt know it had that in there |
|
| Author: | atari4x4 [ Tue Jan 05, 2010 11:50 pm ] |
| Post subject: | Re: spoties wired in to hi beam |
cool maybe we could add that diagram to the tech topic? |
|
| Author: | DMAC [ Tue Jan 05, 2010 11:53 pm ] |
| Post subject: | Re: spoties wired in to hi beam |
This may also assist. http://auszookers.com/index.php?name=Fo ... light=wire |
|
| Author: | Ben_Sierra [ Wed Jan 06, 2010 12:04 am ] |
| Post subject: | Re: spoties wired in to hi beam |
DMAC wrote:
Yep, slightly different setup but works in virtually the same way as mine does... the Ground pin on the headlight is permanent 12V.... looks a bit neater than mine too
|
|
| Author: | royce [ Wed Jan 06, 2010 12:09 am ] |
| Post subject: | Re: spoties wired in to hi beam |
DMAC wrote:
Ive taken the info from this thread and added it to the tech guide and taken my diagram off 
|
|
| Author: | Ben_Sierra [ Wed Jan 06, 2010 12:12 am ] |
| Post subject: | Re: spoties wired in to hi beam |
Your diagram is still pretty useul though Royce, for anyone who wants to upgrade the shitty stock headlight wiring.... |
|
| Author: | steak_knife [ Wed Jan 06, 2010 12:23 am ] |
| Post subject: | Re: spoties wired in to hi beam |
Ben_Sierra wrote: Your diagram is still pretty useul though Royce, for anyone who wants to upgrade the shitty stock headlight wiring....
X2, both there could be useful
|
|
| Author: | royce [ Wed Jan 06, 2010 12:27 am ] |
| Post subject: | Re: spoties wired in to hi beam |
Ben_Sierra wrote: Your diagram is still pretty useul though Royce, for anyone who wants to upgrade the shitty stock headlight wiring....
yeah I need to go find the old text that goes with it and make up a new article I think |
|
| Author: | shep [ Wed Jan 06, 2010 12:35 am ] |
| Post subject: | Re: spoties wired in to hi beam |
i am gunna be putting some new driving lights on my sierra next weekend so i can take some photos and stuff on how i do it. |
|
| Author: | MacDaddy [ Wed Jan 06, 2010 9:30 am ] |
| Post subject: | Re: spoties wired in to hi beam |
Ben_Sierra wrote: DMAC wrote: Yep, slightly different setup but works in virtually the same way as mine does... the Ground pin on the headlight is permanent 12V.... looks a bit neater than mine too Yeah after an hour of cursing and swearing  and ending up with odd bits of various length wire, i finally figured out, with the help of a volt meter, that the headlights are Negative switching, and they have constant 12volts to them !  
FYI, if you are gonna do it yourself, make sure the power from the battery is fused, very important, and make the wires, at the very minimum, 15amp, 20 or 25 would be better, spotties use alot of amps, my standard 40amp alternator sure feels the drain at low rev's 
|
|
| Author: | squizzytaylor [ Wed Jan 06, 2010 11:32 am ] |
| Post subject: | Re: spoties wired in to hi beam |
I know there have been a stack of different wiring diagrams put up but this is about the simplest Ive seen, and as long as the relay is switched via the 2 headlight cables it will work on either negative or positive switched vehicles. You can also build an adapter for the headlight loom for about $5. Cheers Geoff 
|
|
| Author: | MacDaddy [ Wed Jan 06, 2010 11:50 am ] |
| Post subject: | Re: spoties wired in to hi beam |
squizzytaylor wrote: I know there have been a stack of different wiring diagrams put up but this is about the simplest Ive seen, and as long as the relay is switched via the 2 headlight cables it will work on either negative or positive switched vehicles.
You can also build an adapter for the headlight loom for about $5. Cheers Geoff Yep that is very simple, and very easy to understand, wish i had seen this before my attempt at it, lol, oh well, they work now
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|