| auszookers.com https://auszookers.com/forum/ |
|
| sierra gear box problems??? https://auszookers.com/forum/viewtopic.php?f=5&t=9056 |
Page 1 of 1 |
| Author: | brodiezook [ Thu Jan 07, 2010 11:14 pm ] |
| Post subject: | sierra gear box problems??? |
my white sierra i bought it was stuck in 2nd gear and you could move the gearstick in a full circle with it doin nothing what could possibly be wrong?? where should i start to try and find the problem ?? cheers brodie |
|
| Author: | steak_knife [ Thu Jan 07, 2010 11:23 pm ] |
| Post subject: | Re: sierra gear box problems??? |
brodiezook wrote: my white sierra i bought it was stuck in 2nd gear and you could move the gearstick in a full circle with it doin nothing what could possibly be wrong??
where should i start to try and find the problem ?? cheers brodie By pulling the g/stick out, could be the bush so flogged out that the stick has come out of it's home..  
|
|
| Author: | jonno_racing [ Fri Jan 08, 2010 12:13 am ] |
| Post subject: | Re: sierra gear box problems??? |
yep what he said also could be the pin bit on the shifter sheered off, will give the same feeling |
|
| Author: | Scrawny [ Fri Jan 08, 2010 12:18 am ] |
| Post subject: | Re: sierra gear box problems??? |
It's the little bolt that locates the shifter, screws into the back of the top plate where the shifter goes in |
|
| Author: | steve [ Fri Jan 08, 2010 12:23 am ] |
| Post subject: | Re: sierra gear box problems??? |
Replace it with another gearbox you have laying around 
|
|
| Author: | Scrawny [ Fri Jan 08, 2010 12:24 am ] |
| Post subject: | Re: sierra gear box problems??? |
steve wrote: Replace it with another gearbox you have laying around
You're so full of good ideas Steve 
|
|
| Author: | royce [ Fri Jan 08, 2010 12:30 am ] |
| Post subject: | Re: sierra gear box problems??? |
pull that bolt out and if it doesnt have a thinner no threaded bit on the end dont jsut pull the stick out!!!!! undo the plate and fish the broken bit out of the groove in the shifter first, so it doesnt fall down into teh hole |
|
| Author: | brodiezook [ Fri Jan 08, 2010 1:53 am ] |
| Post subject: | Re: sierra gear box problems??? |
ok i took the shifter out and heres some pics .. 
im not too sure what im looking at or if something is wrong but the shifter groove looks a bit thrashed out.. cheers brodie |
|
| Author: | jonno_racing [ Fri Jan 08, 2010 2:10 am ] |
| Post subject: | Re: sierra gear box problems??? |
looks like it may be the bushing or internal mate! |
|
| Author: | brodiezook [ Fri Jan 08, 2010 2:30 am ] |
| Post subject: | Re: sierra gear box problems??? |
jonno_racing wrote: looks like it may be the bushing or internal mate!
where is the bushing and were can i get a new one ?? i was thinking of opening up the box as i thought it was mroe than taht before but im really not sure aye brodie |
|
| Author: | jonno_racing [ Fri Jan 08, 2010 2:48 am ] |
| Post subject: | Re: sierra gear box problems??? |
well the pin that usualy alows them to wobble around is still there... thats what usualy causes play like that.. hell yeah open her up! |
|
| Author: | slowsierra [ Fri Jan 08, 2010 3:30 am ] |
| Post subject: | Re: sierra gear box problems??? |
looks to me like the bush is missing. the bush goes over the top of the knuckle (the ball part of the gear stick) and holds the shifter in place once you tighten the three bolts back up. make sure the gear box is in N when you put it back together just makes it easier cheers greg |
|
| Author: | brodiezook [ Fri Jan 08, 2010 3:47 am ] |
| Post subject: | Re: sierra gear box problems??? |
would anyone have a pic of the bush that i maybe missing here as nothing else came out when i took that off ?? other wise if its not that ill just start pulling it apart see how i go
brodie |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|