auszookers.com :: View topic - GV Alloy wheels on a jimny

ill be over soon with 4 and a camera :lol:

Hey guys,

I was wondering whether anybody could tell me if the newer style GV alloy's will fit on an 06 (vac hubbed) jimny? I am quite sure the stud pattern is the same which is all well and good and they are a larger diameter so should have no dramas bumping on the brakes or anything like that - but I was wondering whether the hubs at the front would fit around the rims - as the GVs don't have the protruding hubs.

Cheers
Chris

They'll fit my swift sport :twisted:

Same bolt pattern

parfittron wrote:

No Tim, I said what I meant to say cause it answered his question.. :roll:

steknig wrote:

parfittron wrote:

No Tim, I said what I meant to say cause it answered his question.. :roll:

Author:	parfittron [ Sun Jan 10, 2010 4:28 am ]
Post subject:	GV Alloy wheels on a jimny
Hey guys, I was wondering whether anybody could tell me if the newer style GV alloy's will fit on an 06 (vac hubbed) jimny? I am quite sure the stud pattern is the same which is all well and good and they are a larger diameter so should have no dramas bumping on the brakes or anything like that - but I was wondering whether the hubs at the front would fit around the rims - as the GVs don't have the protruding hubs. Cheers Chris

Author:	steak_knife [ Sun Jan 10, 2010 4:30 am ]
Post subject:	Re: GV Alloy wheels on a jimny
No, center hole on the Gv rim's to small.

Author:	parfittron [ Sun Jan 10, 2010 4:35 am ]
Post subject:	Re: GV Alloy wheels on a jimny
damn - as I suspected. Thanks for the swift reply though!

Author:	steak_knife [ Sun Jan 10, 2010 4:36 am ]
Post subject:	Re: GV Alloy wheels on a jimny
No worry's.

Author:	Damo [ Sun Jan 10, 2010 2:15 pm ]
Post subject:	Re: GV Alloy wheels on a jimny
What about the stud pattern? AFAIK Jimnys are 5x139.7 and the new GV is 5x114.3

auszookers.com https://auszookers.com/forum/

GV Alloy wheels on a jimny https://auszookers.com/forum/viewtopic.php?f=5&t=9119	Page 1 of 1

Author:	ODA1 [ Sun Jan 10, 2010 6:25 pm ]
Post subject:	Re: GV Alloy wheels on a jimny
i think what stekky meant to say was that 98 - 05 GV rims will fit all jimny's just the current shape GV wont fit any other zook.

Author:	Fatzook [ Sun Jan 10, 2010 6:50 pm ]
Post subject:	Re: GV Alloy wheels on a jimny
They'll fit my swift sport Same bolt pattern

Author:	ODA1 [ Sun Jan 10, 2010 7:27 pm ]
Post subject:	Re: GV Alloy wheels on a jimny
ill be over soon with 4 and a camera

Author:	Fatzook [ Sun Jan 10, 2010 7:45 pm ]
Post subject:	Re: GV Alloy wheels on a jimny
ODA1 wrote: ill be over soon with 4 and a camera And a panel beaters hammer and dolly set. Or a 9"

Author:	steak_knife [ Mon Jan 11, 2010 4:35 am ]
Post subject:	Re: GV Alloy wheels on a jimny
parfittron wrote: Hey guys, I was wondering whether anybody could tell me if the newer style GV alloy's will fit on an 06 (vac hubbed) jimny? I am quite sure the stud pattern is the same which is all well and good and they are a larger diameter so should have no dramas bumping on the brakes or anything like that - but I was wondering whether the hubs at the front would fit around the rims - as the GVs don't have the protruding hubs. Cheers Chris No Tim, I said what I meant to say cause it answered his question..

Author:	steak_knife [ Mon Jan 11, 2010 4:36 am ]
Post subject:	Re: GV Alloy wheels on a jimny
Fatzook wrote: They'll fit my swift sport Same bolt pattern The new Gv's, sx4's to.

Author:	ODA1 [ Mon Jan 11, 2010 4:39 am ]
Post subject:	Re: GV Alloy wheels on a jimny
steknig wrote: parfittron wrote: Hey guys, I was wondering whether anybody could tell me if the newer style GV alloy's will fit on an 06 (vac hubbed) jimny? I am quite sure the stud pattern is the same which is all well and good and they are a larger diameter so should have no dramas bumping on the brakes or anything like that - but I was wondering whether the hubs at the front would fit around the rims - as the GVs don't have the protruding hubs. Cheers Chris No Tim, I said what I meant to say cause it answered his question..

Author:	steak_knife [ Mon Jan 11, 2010 4:40 am ]
Post subject:	Re: GV Alloy wheels on a jimny
ODA1 wrote: steknig wrote: parfittron wrote: Hey guys, I was wondering whether anybody could tell me if the newer style GV alloy's will fit on an 06 (vac hubbed) jimny? I am quite sure the stud pattern is the same which is all well and good and they are a larger diameter so should have no dramas bumping on the brakes or anything like that - but I was wondering whether the hubs at the front would fit around the rims - as the GVs don't have the protruding hubs. Cheers Chris No Tim, I said what I meant to say cause it answered his question.. Very mature Tim.........

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/