| auszookers.com https://auszookers.com/forum/ |
|
| dual transfer case set up https://auszookers.com/forum/viewtopic.php?f=5&t=9140 |
Page 1 of 2 |
| Author: | bede [ Mon Jan 11, 2010 2:06 pm ] |
| Post subject: | dual transfer case set up |
am looking at carrying out a dual transfer set up in my 2nd ute any help idears pics etc would be good thanks |
|
| Author: | want33s [ Mon Jan 11, 2010 2:08 pm ] |
| Post subject: | Re: dual transfer case set up |
Talk to Joeblow. |
|
| Author: | bede [ Mon Jan 11, 2010 2:13 pm ] |
| Post subject: | Re: dual transfer case set up |
ok thanks has he done this mod |
|
| Author: | bede [ Mon Jan 11, 2010 2:14 pm ] |
| Post subject: | Re: dual transfer case set up |
ok thanks has he done this mod |
|
| Author: | want33s [ Mon Jan 11, 2010 2:17 pm ] |
| Post subject: | Re: dual transfer case set up |
bede wrote: ok thanks has he done this mod
Several times in SWB & LWB. |
|
| Author: | bede [ Mon Jan 11, 2010 2:44 pm ] |
| Post subject: | Re: dual transfer case set up |
ok sory about this but only new to pc and stuff how do i talk to joeblow thanks |
|
| Author: | tanshi [ Mon Jan 11, 2010 2:51 pm ] |
| Post subject: | Re: dual transfer case set up |
i will try and get some pics of my setup. |
|
| Author: | 31zook [ Mon Jan 11, 2010 3:21 pm ] |
| Post subject: | Re: dual transfer case set up |
joe is a busy man so reply's take a while... |
|
| Author: | lukes_89 [ Mon Jan 11, 2010 4:09 pm ] |
| Post subject: | Re: dual transfer case set up |
hey my room mates brother has done it its insane but hes using a vitara and a 1.3 transfer |
|
| Author: | bede [ Mon Jan 11, 2010 5:18 pm ] |
| Post subject: | Re: dual transfer case set up |
im hopping to use two 1lt transfers as i have lots of suzuki spears built up over the years. i have 2 utes one road rego with stage 2 rock clawer gears but want to save some moeny thjs time one this build up as im a macanich welder by trade am keen to have a go |
|
| Author: | matty87 [ Mon Jan 11, 2010 6:31 pm ] |
| Post subject: | Re: dual transfer case set up |
ill second that if anyone has pics please post em up im keen to have a look and maybe a crack at it. |
|
| Author: | BlueSuzy [ Mon Jan 11, 2010 6:34 pm ] |
| Post subject: | Re: dual transfer case set up |
bede wrote: im hopping to use two 1lt transfers as i have lots of suzuki spears built up over the years. i have 2 utes one road rego with stage 2 rock clawer gears but want to save some moeny thjs time one this build up as im a macanich welder by trade am keen to have a go
Great, i have 2 spears in my cave. wtf is a macanich welder trade? Never heard of it before. Your better off with a set of 1 transfer case gearing. 2 sierra transfers will be a shitfight. |
|
| Author: | bede [ Mon Jan 11, 2010 7:46 pm ] |
| Post subject: | Re: dual transfer case set up |
not up on your wtf blue but a macanich is somone that fixers cars,and a welder is somone that can weld stuff i hate when people got no idear so they carry on with there sh#t but hay your is built not bought luao thanks |
|
| Author: | royce [ Mon Jan 11, 2010 7:50 pm ] |
| Post subject: | Re: dual transfer case set up |
you wont get far if you want to have a go at people round here 
2 sierra transfers ends in tears, you end up having to rotate 1 transfer around and you cant reach the selector without climbing underneath 
Joes setup with a vitarta transfer is pretty nice, look around on here youll find some pics |
|
| Author: | atari4x4 [ Mon Jan 11, 2010 7:54 pm ] |
| Post subject: | Re: dual transfer case set up |
bede wrote: not up on your wtf blue but a macanich is somone that fixers cars,and a welder is somone that can weld stuff i hate when people got no idear so they carry on with there sh#t but hay your is built not bought luao thanks
when you say macanich do you mean mechanic? as in motor mechanic... |
|
| Author: | bede [ Mon Jan 11, 2010 8:12 pm ] |
| Post subject: | Re: dual transfer case set up |
if ya give u take it yeah sorry no harm meet and as you noticed i cannot spell very well where would i look to find theis pics |
|
| Author: | 31zook [ Mon Jan 11, 2010 8:23 pm ] |
| Post subject: | Re: dual transfer case set up |
this is joe's truck http://auszookers.com/index.php?name=Fo ... llow+thing this is a D.I.Y. on twin casing it... http://auszookers.com/index.php?name=Fo ... 52&start=0 |
|
| Author: | bede [ Mon Jan 11, 2010 9:13 pm ] |
| Post subject: | Re: dual transfer case set up |
thanks 4 that he is very good at what does |
|
| Author: | v.w.dave [ Mon Jan 11, 2010 11:55 pm ] |
| Post subject: | Re: dual transfer case set up |
bede wrote: not up on your wtf blue but a macanich is somone that fixers cars,and a welder is somone that can weld stuff i hate when people got no idear so they carry on with there sh#t but hay your is built not bought luao thanks
MATE YOUR NOT GOING TO LAST LONG ON HERE..... Read back on what you wrote, It was you that didn't make a lick of sense. What in the hell are you asking??? Mate I cant spell for shit but your on a hole nother level. Take a second to re-read before you post. The people that have replied to you on here so far are some of the smartest zook heads on here so step back and start over. I am a bit of a pain in the ass on here myself But when your new and asking for help calm the fuck down. If someone has not given you the answer you were looking for, Pull the carrot out of your ass and think???? Did you ask the right question? NEXT..... |
|
| Author: | 31zook [ Tue Jan 12, 2010 12:16 am ] |
| Post subject: | Re: dual transfer case set up |
v.w.dave wrote: bede wrote: not up on your wtf blue but a macanich is somone that fixers cars,and a welder is somone that can weld stuff i hate when people got no idear so they carry on with there sh#t but hay your is built not bought luao thanks MATE YOUR NOT GOING TO LAST LONG ON HERE..... Read back on what you wrote, It was you that didn't make a lick of sense. What in the hell are you asking??? Mate I cant spell for shit but your on a hole nother level. Take a second to re-read before you post. The people that have replied to you on here so far are some of the smartest zook heads on here so step back and start over. I am a bit of a pain in the ass on here myself But when your new and asking for help calm the fuck down. If someone has not given you the answer you were looking for, Pull the carrot out of your ass and think???? Did you ask the right question? NEXT..... dave ya drop kick. I think your good value and funny as so don't get me wrong but royce already had a go at him for being a noob, and he has apologised, so leave it alone.... |
|
| Author: | BlueSuzy [ Tue Jan 12, 2010 12:37 am ] |
| Post subject: | Re: dual transfer case set up |
Mechanic. Welder..? So your a mechanic and a boilermaker. Years of schooling and tafe and you still can't spell? Its amazing you passed! Lol @ atari, vw and 31. Itlukayikanspalplopalie! |
|
| Author: | matty87 [ Tue Jan 12, 2010 1:26 am ] |
| Post subject: | Re: dual transfer case set up |
give the poor bloke a rest. he already appologised for being a dick. and so what if he cant spell and keyboards arn't exactly easy to use for the new user. |
|
| Author: | joeblow [ Tue Jan 12, 2010 1:36 am ] |
| Post subject: | Re: dual transfer case set up |
matty87 wrote: give the poor bloke a rest. he already appologised for being a dick. and so what if he cant spell and keyboards arn't exactly easy to use for the new user.
X2..........we all started on forums somewhere and did some learning. harden the f#@k up and give the bloke a go, he has not made any personal remarks so there should be very little sweat. enough of the girlie fest.....lets get on with the bizz. using 2 sierra tcases can be done, but the mounting system will be very spaghetti-like. there have been a few of these shown on pirate 4x4.with you're current vehicle i'd opt for tcase gears (won't hear me say that too often!). when the day comes and you add a heap more power and bigger tyres than you might want to consider the vit cases that i use. i will be adding some more pics soon to tabs swb build.....he has been a slacka and i keep forgeting to take my camera. |
|
| Author: | bede [ Tue Jan 12, 2010 1:59 am ] |
| Post subject: | Re: dual transfer case set up |
thanks for that and would like to see any pic when you get them |
|
| Author: | v.w.dave [ Tue Jan 12, 2010 2:25 am ] |
| Post subject: | Re: dual transfer case set up |
I am sorry mate and all other readers I was back late at work and started writing what I wrote and it was over an hour or so. Yahh so I started the message before anyone else commented then it came out wayyyyyy late. But I still stick by what I said 
Infact I was defending the vets on this page.....  goooooo vets
PSSST noob.... check out word its got this funtion key called idiot check... opps I fat fingered that one I ment spell check.... Its my best freind. Hey if I had to re-learnt how to spell 4 years ago and you can make sense of what I write. Whats your go??? Ohh and read below if you dont know me
Right here VVVVVVVVVVVVVVVVVVVVVV |
|
| Author: | v.w.dave [ Tue Jan 12, 2010 2:34 am ] |
| Post subject: | Re: dual transfer case set up |
BlueSuzy wrote: Mechanic. Welder..? So your a mechanic and a boilermaker. Years of schooling and tafe and you still can't spell?
Its amazing you passed! Lol @ atari, vw and 31. Itlukayikanspalplopalie! OK I give up what the hell is that ment to say Suzy???? and yahh how the hell did you become a mechanic not being able to spell??? I know I just cheated, fluked the and bribed my way through. And look at me know can't fix a fucking sandwich that dosn't have a VW stamped on it. |
|
| Author: | Fatzook [ Tue Jan 12, 2010 2:42 am ] |
| Post subject: | Re: dual transfer case set up |
v.w.dave wrote: BlueSuzy wrote: Mechanic. Welder..? So your a mechanic and a boilermaker. Years of schooling and tafe and you still can't spell? Its amazing you passed! Lol @ atari, vw and 31. Itlukayikanspalplopalie! OK I give up what the hell is that ment to say Suzy???? and yahh how the hell did you become a mechanic not being able to spell??? I know I just cheated, fluked the and bribed my way through. And look at me know can't fix a fucking sandwich that dosn't have a VW stamped on it. You finished yet? 
|
|
| Author: | joeblow [ Tue Jan 12, 2010 2:43 am ] |
| Post subject: | Re: dual transfer case set up |
mmmm.....looks like this thread could use some new years moderation...
|
|
| Author: | steak_knife [ Tue Jan 12, 2010 2:46 am ] |
| Post subject: | Re: dual transfer case set up |
Fatzook wrote: v.w.dave wrote: BlueSuzy wrote: Mechanic. Welder..? So your a mechanic and a boilermaker. Years of schooling and tafe and you still can't spell? Its amazing you passed! Lol @ atari, vw and 31. Itlukayikanspalplopalie! OK I give up what the hell is that ment to say Suzy???? and yahh how the hell did you become a mechanic not being able to spell??? I know I just cheated, fluked the and bribed my way through. And look at me know can't fix a fucking sandwich that dosn't have a VW stamped on it. You finished yet? We can only dream. |
|
| Author: | BlueSuzy [ Tue Jan 12, 2010 2:01 pm ] |
| Post subject: | Re: dual transfer case set up |
Itlukayikanspalplopalie! It's lucky i can spell properly! |
|
| Page 1 of 2 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|