auszookers.com
https://auszookers.com/forum/

low on one side
https://auszookers.com/forum/viewtopic.php?f=5&t=9141		 Page 1 of 1
Author:  mudzookacoatsy [ Mon Jan 11, 2010 2:06 pm ]
Post subject:  low on one side
Hey all I have a question
my right hand side sits down lower the the left

I did notice that the spring on the right is bending the wrong way, it is like an upside down 'u'. Does that mean they are bugged?

if its any help they were the springs i had in it when i had the spoa in it.
Author:  S13RR4 [ Mon Jan 11, 2010 2:19 pm ]
Post subject:  Re: low on one side
mudzookacoatsy wrote:
Hey all I have a question
my right hand side sits down lower the the left

I did notice that the spring on the right is bending the wrong way, it is like an upside down 'u'. Does that mean they are bugged?

if its any help they were the springs i had in it when i had the spoa in it.


typing like this might get you a few more answers ^^

heres the most recent thread on this topic

http://www.auszookers.com/index.php?nam ... IERRA+LEAN
Author:  want33s [ Mon Jan 11, 2010 2:22 pm ]
Post subject:  Re: low on one side
mudzookacoatsy wrote:
hey all umm got a Q wats in mean when ya zook seats dwn on one side lower then the other my right hand side seats dwn lower the the left i didi notice that the spring on the right is bending the wrong way it like a upside down u. does that mean they r bugged? if its any help they were the springs i had in it when i had the spoa in it.

I'd like to try and answer but that is too hard to read and make sense of.
Sorry.
Author:  lump_a_charcoal [ Mon Jan 11, 2010 3:00 pm ]
Post subject:  Re: low on one side
hai bro it meenz to meny piez lolz...
Author:  shep [ Mon Jan 11, 2010 3:08 pm ]
Post subject:  Re: low on one side
mudzookacoatsy wrote:
hey all umm got a Q wats in mean when ya zook seats dwn on one side lower then the other my right hand side seats dwn lower the the left i didi notice that the spring on the right is bending the wrong way it like a upside down u. does that mean they r bugged? if its any help they were the springs i had in it when i had the spoa in it.


what the fellas are saying is that if ya talk like a 12yo only a 12yo will
understand what you are saying, that is fine if a 12yo has the info you are after.


lump_a_charcoal wrote:
hai bro it meenz to meny piez lolz...


sorry lumpy there is no such thing as to much pie :wink:
Author:  lump_a_charcoal [ Mon Jan 11, 2010 3:15 pm ]
Post subject:  Re: low on one side
mudzookacoatsy wrote:
hey all umm got a Q wats in mean when ya zook seats dwn on one side lower then the other my right hand side seats dwn lower the the left i didi notice that the spring on the right is bending the wrong way it like a upside down u. does that mean they r bugged? if its any help they were the springs i had in it when i had the spoa in it.


Search "Sierra Lean", you will find the answer.
Author:  mudzookacoatsy [ Wed Jan 13, 2010 2:06 am ]
Post subject:  Re: low on one side
sorry all is that beta for u all
Author:  shep [ Wed Jan 13, 2010 2:10 am ]
Post subject:  Re: low on one side
mudzookacoatsy wrote:
Hey all I have a question
my right hand side sits down lower the the left

I did notice that the spring on the right is bending the wrong way, it is like an upside down 'u'. Does that mean they are bugged?

if its any help they were the springs i had in it when i had the spoa in it.


can ya take a photo? does sound like they are fucked but.
Author:  zookster666 [ Wed Jan 13, 2010 2:11 am ]
Post subject:  Re: low on one side
They are talking about SMS talk type English instead
Author:  mudzookacoatsy [ Wed Jan 13, 2010 2:17 am ]
Post subject:  Re: low on one side
ok umm i can put my fist between the wheel and he graud on the l/h/s and and on the r/h/s bout half my fist. i will try get u a pic
Author:  shep [ Wed Jan 13, 2010 2:47 am ]
Post subject:  Re: low on one side
get a pic of the spring and the diff to bumpstop if ya can.
Author:  Ben_Sierra [ Wed Jan 13, 2010 2:55 am ]
Post subject:  Re: low on one side
If by an upside down U you mean that the leaf spring has inverted, then it probably is "bugged" as you put it...
Author:  TZAR [ Wed Jan 13, 2010 3:02 am ]
Post subject:  Re: low on one side
Image
Author:  mudzookacoatsy [ Thu Jan 14, 2010 2:03 am ]
Post subject:  Re: low on one side
ok will shep get back to you soon
Author:  Rockhopper [ Sat Jan 16, 2010 7:52 pm ]
Post subject:  Re: low on one side
lump_a_charcoal wrote:
mudzookacoatsy wrote:
hey all umm got a Q wats in mean when ya zook seats dwn on one side lower then the other my right hand side seats dwn lower the the left i didi notice that the spring on the right is bending the wrong way it like a upside down u. does that mean they r bugged? if its any help they were the springs i had in it when i had the spoa in it.


Search "Sierra Lean", you will find the answer.


So I've searched "Sierra lean" and this is the only page that came up on the subject.lol. I've seen posts on it before but am now searching for some info as to methods of correction, as my old girl has developed a very noticeable lean since going out to wheeny creek. OME springs all around. They've been in the car for well over a year, and the lean has only presented itself after the last trip.
Author:  mudzookacoatsy [ Sun Jan 17, 2010 3:17 pm ]
Post subject:  Re: low on one side
lol could this be part of my problem and how. does that happen?
i got a set of 2'' efs spring yesturday are they any good?
Author:  Rockhopper [ Sun Jan 17, 2010 10:45 pm ]
Post subject:  Re: low on one side
that would cause it. Mine on the other hand seems to be perfectly flat whilst the passenger side has an arc in it. So that probably explains my lean too. I could get it reset, but my experience with reset springs see them flatten out again in no time. Can't say I'm not a little disappointed. I was really happy with the OME springs up until now.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/