| auszookers.com https://auszookers.com/forum/ |
|
| Rust in the sil area https://auszookers.com/forum/viewtopic.php?f=5&t=9191 |
Page 1 of 1 |
| Author: | Tristan [ Wed Jan 13, 2010 1:55 pm ] |
| Post subject: | Rust in the sil area |
Ok so i got some rust down under those plastic peices of shit, now the question i need to know is how should i go about getting that tin shit off ? Tried pliers but that shit is on tight might have to cut it off somehow(pretty horrible at bodywork... ? Oh also is there anyone in newcastle that would be able to do me a decent fix on some rust i have in the a-pillar in the usual spot near the bottom.. will be good with cash/cases 
|
|
| Author: | bede [ Wed Jan 13, 2010 2:07 pm ] |
| Post subject: | Re: Rust in the sil area |
there is spot welds along the tin strip that holdes on the platic bit,you can use a spot weld drill ,drill all spot welds along sill but only drill just though the top layer good luck with that |
|
| Author: | foonji [ Wed Jan 13, 2010 2:29 pm ] |
| Post subject: | Re: Rust in the sil area |
Yup drill the spot welds. they will look like little circle indentations. don't go to deep! |
|
| Author: | Tristan [ Wed Jan 13, 2010 4:44 pm ] |
| Post subject: | Re: Rust in the sil area |
sweet thanks for the tips guys to hot to do today defo a beach day
|
|
| Author: | ZookiMonsta [ Wed Jan 13, 2010 6:43 pm ] |
| Post subject: | Re: Rust in the sil area |
Welcome to the complications of owning a zook.   
& with mine, i just cut out square sections of the sill and made a new plate to weld back in. But i had no intention of puttin the sand catchers back on. |
|
| Author: | Tristan [ Wed Jan 13, 2010 9:30 pm ] |
| Post subject: | Re: Rust in the sil area |
Yea i dont really mind if i do a dirty job iam covering it with that checkerplate shit anywhoo so i will just drill away
Stoked as well just came across a g16b with a blown headgasket(apparently all thats wrong) think i might just get it rebuilt how much does something like that usualy cost ? nothing extreme probably just a freshen up, engine is just on a crate as well.. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|