Pics of the little blighter:
And a close up. That appears to be a spring at the bottom of the hole. Should there be a ball bearing between this and the bolt?? There is also a small piece of grass in there, i dont think this came from factory!
| auszookers.com https://auszookers.com/forum/ |
|
| Mystery allen bolt on transfer? https://auszookers.com/forum/viewtopic.php?f=5&t=9242 |
Page 1 of 1 |
| Author: | bron5on [ Fri Jan 15, 2010 6:48 pm ] |
| Post subject: | Mystery allen bolt on transfer? |
Got hold of a second hand transfer today with 4.16s in and there is a threaded hole on the side of the case about 1.5 inches in front of the filler plug. I looked at my current case and there is a flat headed allen bolt in the hole. Anyone know what it's for? Does it retain something? Cheers fellas! Bronson. |
|
| Author: | tanshi [ Fri Jan 15, 2010 6:58 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
you will possibly find its the detent balls and sprints that keep it in gear |
|
| Author: | bron5on [ Fri Jan 15, 2010 7:28 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
Pics of the little blighter:
And a close up. That appears to be a spring at the bottom of the hole. Should there be a ball bearing between this and the bolt?? There is also a small piece of grass in there, i dont think this came from factory!
|
|
| Author: | tanshi [ Fri Jan 15, 2010 7:39 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
the ball bearing will be or should be beneath the spring. |
|
| Author: | bron5on [ Fri Jan 15, 2010 8:00 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
Thanks tanshi. Just ordered new ones as part of a transfer kit as the lever bush is pretty trashed. I'd swap the same bush over from my other transfer but that one is looking a little second hand also! |
|
| Author: | lump_a_charcoal [ Fri Jan 15, 2010 8:12 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
That grass is aftermarket. |
|
| Author: | bron5on [ Fri Jan 15, 2010 8:19 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
lump_a_charcoal wrote: That grass is aftermarket.
Yeah I thought it might be. Unsure of brand
|
|
| Author: | bron5on [ Fri Jan 15, 2010 8:47 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
The transfer seems to shift very easily between 2wd and 4wd. Barely need fingertip pressure to do it, there's no resistance whatsoever. Is this caused by the missing bolt? Does this case need to come apart?? |
|
| Author: | tanshi [ Fri Jan 15, 2010 9:31 pm ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
i would say thats due to the missing bolt, its not holding the ball in its notches |
|
| Author: | Gonzo [ Sat Jan 16, 2010 4:26 am ] |
| Post subject: | Re: Mystery allen bolt on transfer? |
tanshi wrote: i would say thats due to the missing bolt, its not holding the ball in its notches
Hey Hey Keep it clean Darren 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|