OMalley wrote:
Cheers for that mate
| auszookers.com https://auszookers.com/forum/ |
|
| Coily Dash https://auszookers.com/forum/viewtopic.php?f=5&t=9321 |
Page 1 of 1 |
| Author: | Junior_91 [ Wed Jan 20, 2010 3:54 am ] |
| Post subject: | Coily Dash |
Does anyone know if a coily dash will fit a wt leaf sierra? Any info appreciated. |
|
| Author: | 89_tintop [ Wed Jan 20, 2010 3:57 am ] |
| Post subject: | Re: Coily Dash |
x2 really interested to know if they do i beleive they do 16zuk did a couple i think to his cars.i dont see a problem with fitment, i beleive the problem would be with the wiring to the dash. |
|
| Author: | OMalley [ Wed Jan 20, 2010 4:02 am ] |
| Post subject: | Re: Coily Dash |
JCZOOK has done it. Looks very well done too. http://www.auszookers.com/index.php?nam ... c&start=15 |
|
| Author: | Junior_91 [ Wed Jan 20, 2010 4:07 am ] |
| Post subject: | Re: Coily Dash |
OMalley wrote:
Cheers for that mate
|
|
| Author: | Gwagensteve [ Wed Jan 20, 2010 9:59 pm ] |
| Post subject: | Re: Coily Dash |
I'd be interested to know how that dash conversion went. Coiler dashes are lovely, but they weren't designed for folding windscreens. I've been in a soft top that was coil dash converted and it was terribly rattly and wobbly - clearly some of the attachment points are different. Steve. |
|
| Author: | Saam [ Wed Jan 20, 2010 10:12 pm ] |
| Post subject: | Re: Coily Dash |
pretty sure you have to do your own brackets up, it's usually pretty easy to improve factory mounting arrangements |
|
| Author: | JCZOOK [ Thu Jan 21, 2010 7:28 pm ] |
| Post subject: | Re: Coily Dash |
It took me 11 hours start to finish. The coily dash is wider so it wraps around the big windscreen clips at the two sides. I used these as mounts for the coily dash. The metal brackets under the windscreen will need to be chopped off (will make sense when you pull your dash out). The top middle and drivers side mounting holes will line up. You can use leaf or coil heater controls. The mounting hole behind the cigarette lighter will line up. I swapped in a coily bonnet cable as well as they are mounted differently. Also used a coily steering wheel and steering column shroud. Shroud had to be cut abit so the washer jets could work and steering coloumn spaced down. As for wiring the two dashes are completley different but with patience you can just trace each wire on the back of each dash facia. It's definatley worth it it transformed my zook inside |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|