| auszookers.com https://auszookers.com/forum/ |
|
| drive shaft spacer for a coily https://auszookers.com/forum/viewtopic.php?f=5&t=9397 |
Page 1 of 1 |
| Author: | Ridge [ Sun Jan 24, 2010 10:35 pm ] |
| Post subject: | drive shaft spacer for a coily |
since i have liffted my transfer case, the teeth are showing on the rear drive shaft. would i be able to fit a spacer for a wt? ill get some pictures up soon |
|
| Author: | want33s [ Sun Jan 24, 2010 10:36 pm ] |
| Post subject: | Re: drive shaft spacer for a coily |
One of the few parts that will fit a coily are leafy shafts so a WT spacer will bolt straight in. |
|
| Author: | Ridge [ Sun Jan 24, 2010 10:44 pm ] |
| Post subject: | Re: drive shaft spacer for a coily |
thanks, ill try and get one before next weekend |
|
| Author: | Junior_91 [ Mon Jan 25, 2010 12:44 am ] |
| Post subject: | Re: drive shaft spacer for a coily |
I have a spacer mate it's 3/4" brand new. |
|
| Author: | Reubs [ Mon Jan 25, 2010 5:58 pm ] |
| Post subject: | Re: drive shaft spacer for a coily |
Ridge wrote: since i have liffted my transfer case, the teeth are showing on the rear drive shaft. would i be able to fit a spacer for a wt? ill get some pictures up soon
Hi Ridge. How much lift do you have? Have you ever greased the shaft? That should push the rubber boot back over the exposed spline. If not, you might need one. I haven't bothered with one. I have 40mm spring lift + 50mm t/case lift. Reubs. |
|
| Author: | Ridge [ Mon Jan 25, 2010 10:30 pm ] |
| Post subject: | Re: drive shaft spacer for a coily |
i have a 40mm suspension lift and a 40mm transfer lift. i have greased the shaft but the boot wont cover the spline. junior_91 you have a pm |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|