auszookers.com
https://auszookers.com/forum/

Coily/Jimny Axles
https://auszookers.com/forum/viewtopic.php?f=5&t=9464		 Page 1 of 1
Author:  Highway-Star [ Wed Jan 27, 2010 4:02 pm ]
Post subject:  Coily/Jimny Axles
OK, for all you people who love the coily Sierra's and Jimny's :D

I would like to know the length of a short side coily rear axle shaft, and/or the length of the short side Jimny rear axle shaft. Measurement from the end of the spline to the surface that the drum bolts onto would be lovely :D

Thanks
Author:  want33s [ Wed Jan 27, 2010 6:11 pm ]
Post subject:  Re: Coily/Jimny Axles
Dunno about Jimny but coily axles are 15mm longer each side than WT axles.
That trivia may help. :roll: :wink:
Author:  Highway-Star [ Wed Jan 27, 2010 6:27 pm ]
Post subject:  Re: Coily/Jimny Axles
want33s wrote:
Dunno about Jimny but coily axles are 15mm longer each side than WT axles.
That trivia may help. :roll: :wink:



Hey Thanks.
If then the short shaft is also 15mm longer than WT, it might be what I am after :D
Author:  Gwagensteve [ Thu Jan 28, 2010 3:13 am ]
Post subject:  Re: Coily/Jimny Axles
Could be wrong, but I thought it was 17.5mm per side.

Steve.
Author:  want33s [ Thu Jan 28, 2010 3:16 am ]
Post subject:  Re: Coily/Jimny Axles
Gwagensteve wrote:
Could be wrong, but I thought it was 17.5mm per side.

Steve.

Yeah ok.... 15mm plus a cutting disc.... 8O
Author:  Highway-Star [ Thu Jan 28, 2010 3:26 am ]
Post subject:  Re: Coily/Jimny Axles
Either or should be OK.
Need a Suzuki 26 spline shaft that is ~548mm long. WT short side is ~538mm long. So hopefully a coily shaft will work, even if it requires some trimming :D (pending the spline being long enough).

Now I just need to find some, this might be the hard part :? :lol:

Thanks Guys :D
Author:  bagnkat [ Thu Jan 28, 2010 3:31 am ]
Post subject:  Re: Coily/Jimny Axles
Highway-Star wrote:
Now I just need to find some, this might be the hard part :? :lol:


There is a dead coily at Ipswich auto wreckers at Brassal. Last time I was there (about 2 weeks ago) the drivetrain was complete.
Author:  Highway-Star [ Thu Jan 28, 2010 3:35 am ]
Post subject:  Re: Coily/Jimny Axles
bagnkat wrote:
Highway-Star wrote:
Now I just need to find some, this might be the hard part :? :lol:


There is a dead coily at Ipswich auto wreckers at Brassal. Last time I was there (about 2 weeks ago) the drivetrain was complete.



really? My old man said the entire rear diff was gone :?
Might give them a call tomorrow, I am a regular customer there :P
Cheers
Author:  bagnkat [ Thu Jan 28, 2010 3:40 am ]
Post subject:  Re: Coily/Jimny Axles
yeah, might be an idea to call them :? I'm sure it was complete, I was under it looking for a speedo cable.
Author:  Taff [ Thu Jan 28, 2010 3:49 am ]
Post subject:  Re: Coily/Jimny Axles
I am running a trimmed coily axle in a WT diff.

I trimmed about 15mm off. Heaps of spline left ;)
Author:  Highway-Star [ Thu Jan 28, 2010 3:54 am ]
Post subject:  Re: Coily/Jimny Axles
Taff wrote:
I am running a trimmed coily axle in a WT diff.

I trimmed about 15mm off. Heaps of spline left ;)



Sweet, thanks Taff. They will definitely be what is wanted then, just need to get them.

Yeah, I'll call them bagnkat. My father does get a bit confused at times, anyway hes usually paying more attention to the Toyota wrecks.
Author:  tanshi [ Fri Jan 29, 2010 1:38 am ]
Post subject:  Re: Coily/Jimny Axles
now just need another one :)
Author:  Highway-Star [ Fri Jan 29, 2010 3:49 am ]
Post subject:  Re: Coily/Jimny Axles
Yeah, thanks bagnkat, got the shaft from that coily today. The rear diff was there, just not attached to the car lol.

a second one, and we'll be all set :D
Author:  Ridge [ Fri Jan 29, 2010 4:50 am ]
Post subject:  Re: Coily/Jimny Axles
did you see any rear control arms for that coily?
Author:  Highway-Star [ Fri Jan 29, 2010 5:11 am ]
Post subject:  Re: Coily/Jimny Axles
Ridge wrote:
did you see any rear control arms for that coily?


Yeah, the drivers side rear one was there, attached to the chassis. Not sure about any of the others.
Author:  gman [ Sat Jan 30, 2010 3:20 am ]
Post subject:  Re: Coily/Jimny Axles
Jimny's short rear axle are 565mm long with 45mm of spline
Author:  Highway-Star [ Sat Jan 30, 2010 5:01 am ]
Post subject:  Re: Coily/Jimny Axles
gman wrote:
Jimny's short rear axle are 565mm long with 45mm of spline



Cheers, that clears up that unknown then. Probably could just get away with a heavily trimmed down one, but I think the coily is the go. When we figure out the final few teething issues I'll post up what I'm getting at... I think its pretty cool anyway :D
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/