thanks alot for the info and pics, pm sent.
| auszookers.com https://auszookers.com/forum/ |
|
| G16a efi??? https://auszookers.com/forum/viewtopic.php?f=5&t=9506 |
Page 1 of 1 |
| Author: | bigrig91 [ Fri Jan 29, 2010 1:07 pm ] |
| Post subject: | G16a efi??? |
Ok, I have a g16a block with 1.3 head and carby.... I'm sick of my carb giving me shit sooo my thought was to put a 1.6 efi head on and do the necesary mods to go down that road??? Is this possible ? Cheers brad |
|
| Author: | want33s [ Fri Jan 29, 2010 1:55 pm ] |
| Post subject: | Re: G16a efi??? |
You can fit import Vitara TBI to an 8 valve G16 head(bolt on) or I believe there were a few Swifts with TBI on 8 valves too. If I were you I'd sell all the bits you have and buy a G16B MPFI. |
|
| Author: | bigrig91 [ Fri Jan 29, 2010 9:59 pm ] |
| Post subject: | Re: G16a efi??? |
Cheers want33, only downside to that is the price difference of the cost of the new motor, rebuild etc to th total of all my bits. I would still be looking at 500????ish? |
|
| Author: | bagnkat [ Fri Jan 29, 2010 10:35 pm ] |
| Post subject: | Re: G16a efi??? |
Below is a photo of the g16a from my sierra with a 16 valve mpfi head on it. Keep in mind if you're doing this conversion you'll need a fuel tank that can support an in tank pump (ie coily tank) or alternatively you'll need to add a surge tank. Either way you'll need a fuel injection pump as well. Considering the amount of work - and if you're on a tight budget, for the performance increase you get, I still wouldn't discount getting a better carby and exhaust. |
|
| Author: | bigrig91 [ Fri Jan 29, 2010 11:06 pm ] |
| Post subject: | Re: G16a efi??? |
thanks alot for the info and pics, pm sent.
|
|
| Author: | bigrig91 [ Fri Jan 29, 2010 11:14 pm ] |
| Post subject: | Re: G16a efi??? |
Well now you say that, I assume its a possibility to put a 1.6 carb on in place of the 1.3? or fuck it and go webber hahaha |
|
| Author: | joeblow [ Fri Jan 29, 2010 11:25 pm ] |
| Post subject: | Re: G16a efi??? |
yeah....go 100 steps backwards by using a weber carb..... |
|
| Author: | bigrig91 [ Fri Jan 29, 2010 11:27 pm ] |
| Post subject: | Re: G16a efi??? |
haha exactly.. |
|
| Author: | JrZook [ Sat Jan 30, 2010 4:11 am ] |
| Post subject: | Re: G16a efi??? |
joeblow wrote: yeah....go 100 steps backwards by using a weber carb..... C'mon they aint that bad! bigrig91 wrote: haha exactly..
Bigrig have you driven a weber powered rig before?? What sort of stuff do you drive? Yes continual 'just about to roll your car' offroad it will be no good for but I found for the extra performance and the absolute simplicity of the carb it was worth it. Yes it did have a stall here and there although the angles wern't what you would call nothing. With the low range gears I had no problems doing the tracks at ormeau and such. In the 3 years I had it on the car I never had to touch the thing. Dan |
|
| Author: | bigrig91 [ Sat Jan 30, 2010 4:31 am ] |
| Post subject: | Re: G16a efi??? |
hey jr, i have never driven a weber powered suzi or 4by for that matter, but a worked cortina and escort i have. so i guess i can only make assumptions about the 4x4 capabilities of them. Can i ask what size you used, i have heard of the one on ebay that is supposedly modded for wheeling. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|