stuzuki wrote:
if im running a 1L and headers what size exhaust is everyone running
Go for a two inch
| auszookers.com https://auszookers.com/forum/ |
|
| cat convert https://auszookers.com/forum/viewtopic.php?f=5&t=9545 |
Page 1 of 1 |
| Author: | stuzuki [ Sun Jan 31, 2010 4:27 am ] |
| Post subject: | cat convert |
hey guys do 82 lwb sierra have a cat convertors. just asking as i nam finishing the project and i never came with exhaust. need to know if i have to put one in. cheers. |
|
| Author: | v.w.dave [ Sun Jan 31, 2010 4:41 am ] |
| Post subject: | Re: cat convert |
Hey stu Nick has a complete exaust off a n/t 1.3 here it has a cat on it let me know. You could probably use it to get it pas the blue slip. |
|
| Author: | v.w.dave [ Sun Jan 31, 2010 4:46 am ] |
| Post subject: | Re: cat convert |
or you could get ahold of zooktastic he has a rusted out tin top with the 1l in it, he has the exaust sitting next to it. |
|
| Author: | shep [ Sun Jan 31, 2010 4:51 am ] |
| Post subject: | Re: cat convert |
only cars made after 86 need a cat. one way to tell is if you can fit the diesel pump in your filler neck then you don't need a cat |
|
| Author: | stuzuki [ Sun Jan 31, 2010 4:56 am ] |
| Post subject: | Re: cat convert |
was just wondering cause if i dont need it i'll just go 2" straight through with a small hotdog mufler. |
|
| Author: | shep [ Sun Jan 31, 2010 5:04 am ] |
| Post subject: | Re: cat convert |
you dont need a cat mate. a hotdog will be a magnet for the police. |
|
| Author: | eldo [ Sun Jan 31, 2010 12:11 pm ] |
| Post subject: | Re: cat convert |
I have 85 lwb and no cat, our cars are meant to run on super |
|
| Author: | stuzuki [ Sun Jan 31, 2010 3:37 pm ] |
| Post subject: | Re: cat convert |
if im running a 1L and headers what size exhaust is everyone running |
|
| Author: | Joe [ Sun Jan 31, 2010 3:41 pm ] |
| Post subject: | Re: cat convert |
stuzuki wrote: if im running a 1L and headers what size exhaust is everyone running
Go for a two inch
|
|
| Author: | Joe [ Sun Jan 31, 2010 3:43 pm ] |
| Post subject: | Re: cat convert |
shep wrote: One way to tell is if you can fit the diesel
pump in your filler neck then you don't need a cat How do you know this have you done it  
|
|
| Author: | shep [ Sun Jan 31, 2010 6:09 pm ] |
| Post subject: | Re: cat convert |
the old super bowser had the same hand piece as a diesel bowser. 
unleaded fillers have a restrictor in them for the smaller hand piece thing |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|