another vote for clark rubber..
or peeJ ones if you can afford em..
*edit*typing in the dark sucks
| auszookers.com https://auszookers.com/forum/ |
|
| flares https://auszookers.com/forum/viewtopic.php?f=5&t=9642 |
Page 1 of 1 |
| Author: | jakeyr [ Thu Feb 04, 2010 3:04 am ] |
| Post subject: | flares |
hey looking at getting some f100 rims for my zook just wondering where is a good place to get flares ? |
|
| Author: | 11_evl [ Thu Feb 04, 2010 3:21 am ] |
| Post subject: | Re: flares |
BUNNINGS |
|
| Author: | weaves [ Thu Feb 04, 2010 3:25 am ] |
| Post subject: | Re: flares |
CLARKE RUBBER |
|
| Author: | foolsp33d [ Thu Feb 04, 2010 3:41 am ] |
| Post subject: | Re: flares |
another vote for clark rubber.. or peeJ ones if you can afford em.. *edit*typing in the dark sucks
|
|
| Author: | ninjadaniel [ Thu Feb 04, 2010 3:59 am ] |
| Post subject: | Re: flares |
i have 2x sets of 4, 2" and 3", already cut to suit widetrack flares. PM me if you are interested |
|
| Author: | foolsp33d [ Thu Feb 04, 2010 4:08 am ] |
| Post subject: | Re: flares |
^^ might want to include just what type of flare you got there matey  ^^
|
|
| Author: | ZookiMonsta [ Fri Feb 05, 2010 1:55 am ] |
| Post subject: | Re: flares |
x2 for BUNNINGS flares, they are cheaper than they look.
|
|
| Author: | Taff [ Fri Feb 05, 2010 2:46 am ] |
| Post subject: | Re: flares |
ZookiMonsta wrote: x2 for BUNNINGS flares, they are cheaper than they look.
no.. they cost about as much as they look 
|
|
| Author: | want33s [ Fri Feb 05, 2010 3:37 am ] |
| Post subject: | Re: flares |
Taff wrote: ZookiMonsta wrote: x2 for BUNNINGS flares, they are cheaper than they look. no.. they cost about as much as they look X2... Bunnings flares aren't flares... They are cheap ass garden edging. 
|
|
| Author: | alex [ Fri Feb 05, 2010 3:44 am ] |
| Post subject: | Re: flares |
i got Clark Rubber flairs 2" wide $14.00 per meter at Lawnton they are good cos they are very flexy so they just bend rather than breaking off 
|
|
| Author: | shandy92 [ Fri Feb 05, 2010 4:26 am ] |
| Post subject: | Re: flares |
weaves wrote: CLARKE RUBBER
x2 |
|
| Author: | ninjamoses [ Fri Feb 05, 2010 4:47 am ] |
| Post subject: | Re: flares |
x3 for Clark Rubber They do a 50mm rubber flare for $15 a metre. The Vit took a smidge under 5m of it to do all 4 guards. The bunnings flares can look pretty damn good still if you take your time with it. As a bonus they are a damn side quicker to put on as the harder plastic requires far less screws then the rubber ones. I believe the 10m roll came in at $22 plus a few bucks for screws, so about 1/4 the price of the rubber stuff and enough to do 2 vehicles worth. |
|
| Author: | jakeyr [ Fri Feb 05, 2010 5:25 am ] |
| Post subject: | Re: flares |
bunnings i didn't even think of that ill have to go get a roll and try it out and see how it looks cheers |
|
| Author: | Hybrid [ Fri Feb 05, 2010 1:41 pm ] |
| Post subject: | Re: flares |
If you want to go for a sierra specific flare I just got some boss flares for mine. They're basically the old calmini flares but they flex. about 10x more expensive than clark rubber flare extenders but about half the price of bushwhackers. I've been running without them for 2 years no dramas but the cops pulled my missus up a couple of weeks back and said if they caught me driving it they'd give me a canary. |
|
| Author: | anDy86 [ Wed Mar 03, 2010 5:23 pm ] |
| Post subject: | Re: flares |
Hey guys just bought myself an 85 NT LWB. The tyres are sticking out a bit (maybe around an inch). just wondering what is the best width to use for flares with Clarke Rubber. and is there any particular way of putting them on or isit as simple as just screw onto wheel arch? apologies if this question has been asked before, tried to research it but my searching skills aint too flash. Thanks |
|
| Author: | 2stroker [ Wed Mar 03, 2010 5:44 pm ] |
| Post subject: | Re: flares |
Sorry I couldn't help it............. 
|
|
| Author: | smileysmoke [ Wed Mar 03, 2010 6:18 pm ] |
| Post subject: | Re: flares |
i used bunnings flares on my zook used black edging 100mm and cut it down to 75mm once installed.(using snips) installed it with rivets going through small washers to spread the load. looks neat and is cheap.. perfect 
can sand the edge or cut it before putting it on and mount the cut edge against the panel.. easy. took an hour or so max |
|
| Author: | shep [ Wed Mar 03, 2010 6:32 pm ] |
| Post subject: | Re: flares |
you guys are getting shafted on your rubber flares. ball got me 10 meters of 70mm rubber flare stuff for $76 including freight to Katherine. i have garden edging on my LWB(there when i bought it) and it is shit. really shit. |
|
| Author: | anDy86 [ Wed Mar 03, 2010 6:48 pm ] |
| Post subject: | Re: flares |
smileysmoke wrote: i used bunnings flares on my zook
used black edging 100mm and cut it down to 75mm once installed.(using snips) installed it with rivets going through small washers to spread the load. looks neat and is cheap.. perfect can sand the edge or cut it before putting it on and mount the cut edge against the panel.. easy. took an hour or so max Thanks for that mate just got the car from NSW and getting it ready for a roadworthy inspection soon. Hopefully wont be too hard Cheers |
|
| Author: | coneykid [ Wed Mar 03, 2010 8:20 pm ] |
| Post subject: | Re: flares |
can anyone post a pic of the 70mm clark rubber flares. |
|
| Author: | anDy86 [ Thu Mar 04, 2010 11:24 pm ] |
| Post subject: | Re: flares |
hey guys jsut another question did you guys get rid of the existing suzuki flares first and then attach the edging on without putting the stoock flare back over it? hope that makes sense. thanks for your replies guys, i have till either tonight or saturday early morning to do this so any help will be appreciated. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|