| auszookers.com https://auszookers.com/forum/ |
|
| Eagle Alloys 15x8 or 10inch wide https://auszookers.com/forum/viewtopic.php?f=5&t=9893 |
Page 1 of 1 |
| Author: | jaczook [ Mon Feb 15, 2010 9:10 pm ] |
| Post subject: | Eagle Alloys 15x8 or 10inch wide |
Hi all I am in 2 minds at the moment, I am going to get some Eagle alloys 058 style polished from the states, but I dont know weather to get them in 15x8 inch or 10inch wide. In NSW 8in is the largest allowed to be enginered but the 10 inch wide looks so sexy because of the big offset available. Its going on my SPOA Sierra check it out from the net http://cgi.ebay.com/ebaymotors/ws/eBayI ... ink:top:en or http://aewheel.com/wheels_detail_specs.cfm?id=23 I have seen a set on RPM,s hardtop zook and they look great. I think he said they were the 8 inch wide Will It be ok to run 10inch wide on a sierra (Wheel bearings)? What should I do 8 or 10 Cheers |
|
| Author: | Ben_Sierra [ Mon Feb 15, 2010 9:37 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
What size tyres do you want to run? |
|
| Author: | jaczook [ Mon Feb 15, 2010 10:45 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
I guess 32-33s would look great, I have a set of Goodyear wrangler Muds to go on |
|
| Author: | Rusho [ Mon Feb 15, 2010 10:51 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
jaczook wrote: I guess 32-33s would look great, I have a set of Goodyear wrangler Muds to go on
8 inch should be fine for that size tyre wouldn't it?? |
|
| Author: | jaczook [ Mon Feb 15, 2010 11:09 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
I got a quote of around $1000 delivered from the states. I have heard that they sell gere in Oz at around $330 each So look like a deal |
|
| Author: | Joe [ Mon Feb 15, 2010 11:20 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
Mate to run 15x10s they would be a huge offset and will kill ya wheelbearings quick smart On my sierra i was running 15x8s with a fair bit of offset 33 inch procomps and my bearings were only lasting six months or so but thats doing 600 kays per week  but at the end of the day its your car so do what ya want to it just make sure you post up some pics 
Oh yeah i do agree with ya though them eagle alloys do look fucken sweet 
|
|
| Author: | Brett [ Mon Feb 15, 2010 11:24 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
go the 8's, 7 is better imo. 10 inch wide you will roll the tyre off the rim when aired down |
|
| Author: | MrRocky [ Mon Feb 15, 2010 11:52 pm ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
I run these on my ute and they are a little more offset than most f100 rims just so you know the rim is about 10mm thicker than a sierra rim therefor the wheelnuts are unable to be wound all the way onto the thread. It hasnt caused me any greif in 5 years of use. Just means the wheelstuds stop about 2-3mm short of the face of the rim. 
|
|
| Author: | Joe [ Tue Feb 16, 2010 12:16 am ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
MrRocky wrote: I run these on my ute and they are a little more offset than most f100 rims
just so you know the rim is about 10mm thicker than a sierra rim therefor the wheelnuts are unable to be wound all the way onto the thread. It hasnt caused me any greif in 5 years of use. Just means the wheelstuds stop about 2-3mm short of the face of the rim. Hey a bit off topic but Mr Rocky you should start a build thread on ya trayback it looks pretty cool
|
|
| Author: | steak_knife [ Tue Feb 16, 2010 12:53 am ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
joseph wrote: MrRocky wrote: I run these on my ute and they are a little more offset than most f100 rims just so you know the rim is about 10mm thicker than a sierra rim therefor the wheelnuts are unable to be wound all the way onto the thread. It hasnt caused me any greif in 5 years of use. Just means the wheelstuds stop about 2-3mm short of the face of the rim. Hey a bit off topic but Mr Rocky you should start a build thread on ya trayback it looks pretty cool X2 !!
Back to the question, 8's are plenty
|
|
| Author: | MrRocky [ Tue Feb 16, 2010 2:04 am ] |
| Post subject: | Re: Eagle Alloys 15x8 or 10inch wide |
hahaha was gunna wait until paint, 33's and roll cage maybe when things stop breaking on it, i will stop being disgusted with it and write something up. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|