[mrw82]

cleaning up and sorting through the mass of crap that I call spare parts. time to get rid of some of it, all items are in unknown used condition unless stated otherwise. open to offers on any of this stuff, pick up is from deception bay.

FOR PICS GO HERE: http://nbs4x4club.com/forum/index.php?topic=13609.0

1 pair of AVM free wheeling hubs to suit suzuki sierra (or anything that runs the same FWH as sierra) $50

soft top spare wheel carrier (tailgate mounted) SOLD

2 x 1.3 starter motors SOLD

4 blade radiator fan, rear view mirror, door hinges and window winder. $5 each item

1.3 wiper motor SOLD

pair of sunvisors $10

1.0 litre jackshaft with 1.3 transfer case flange (needs uni joint) $50

ash tray ( from 1 litre dash)

1 litre 4 speed gearbox, needs new front and rear seals but was running fine when removed $50 (sorry, no pics)

1 litre extractors $40

glove box rain cover/deflector from 1 litre sierra

1 litre front diff, drum brakes, in pieces and NO CV's has 4.11 ratio centre Free

ZVA fuel filler nozzle with swivel, auto shut off and trigger lock. has ULP and diesel spouts. BRAND NEW $150

unbranded fuel filler nozzle with swivel, diesel nozzle. $50

sierra Alloy bullbar $180 SOLD PENDING PAYMENT pics here: http://nbs4x4club.com/forum/index.php?topic=13581.0

[mrw82]

ANYONE interested? most of this stuff will be getting thrown out otherwise, so make an offer

[Highway-Star]

mrw82 wrote:

1 litre 4 speed gearbox, needs new front and rear seals but was running fine when removed $50 (sorry, no pics)

Which model 1L is it from? type 1, 2 or 3 etc?
Basically I want to know if its the "big" one that I can use to make a 5 speed with

[mrw82]

no mate, small one (type 1 I suppose). I only took it out because I fitted a 5 speed.

[Highway-Star]

mrw82 wrote:

no mate, small one (type 1 I suppose). I only took it out because I fitted a 5 speed.

ah, oh well. Thanks anyway.

[mrw82]

I've also found a softtop support hoop $20

and a pair of rear unbranded leaf springs 2"lift. (had same arch and measurements as my 2" OME springs) $50

[steak_knife]

Spring's front or rear??

[mrw82]

mrw82 wrote:

I've also found a softtop support hoop $20

and a pair of rear unbranded leaf springs 2"lift. (had same arch and measurements as my 2" OME springs) $50

[steak_knife]

mrw82 wrote:

mrw82 wrote:

I've also found a softtop support hoop $20

and a pair of rear unbranded leaf springs 2"lift. (had same arch and measurements as my 2" OME springs) $50

Not enough coffee..

[dyllan1]

hey mate condition of extractors
pm me cld be interested

[mrw82]

dyllan1 wrote:

hey mate condition of extractors
pm me cld be interested

They're extractors, not much can go wrong with them. they've got a bit of surface rust, but certainly not corrodded through or anything...

you can come have a look if you like.

[sickzuk1]

Is the support hoop just the bit at the back? Or is it a custom reinforcement bar?

[mrw82]

it's a standard soft top support bar, the fold down one at the back.

[mrw82]

UPDATED.

Make an offer on anything as anything left after the weekend will be getting thrown to the tip (except bullbar)

[dyllan1]

give u 20 for the extractors let me know can pick up today

[mrw82]

dyllan1 wrote:

give u 20 for the extractors let me know can pick up today

PM sent

[mrw82]

SOLD the main stuff so the rest will be going to trash now

[ZookFisher]

still have rear leaf springs? if so where are you located.

[mrw82]

all gone mate