[Daveluke]

SELLING MY COMP ZOOK/DROVER PROJECT I am selling my project vehicle as I no longer have the time or cash to work on it, we are also purchasing a house so it must go. I have spent the majority of the year collecting components for the build and it is all ready to go. All it needs is someone who knows how to weld and in a few weekends you could be on the tracks. I wont fluff on anymore, instead I will write the list of gear on the truck.

VEHICLE
1985 HOLDEN DROVER BODY SINGLE CAB CHOP – some small surface rust
CUSTOM TRAY – Chequer plate and steel
CUSTOM FRONT TUBE BAR
9,000LB WINCH WITH STEEL CABLE
HOLDEN 253 4.2L V8 – currently not running as I was halfway through LPG conversion, has impco 425 and all gas components including tank mounted behind the cab, just needs the dots joined or can be put back to petrol if you wanted however petrol carby doesn’t like big hills, worked 100% before I removed carby etc)
REAR MOUNTED RADIATOR WITH TWIN THERMOS
T700 Auto with Sierra 1.3L transfer – have 1.0L transfer in shed will be sold with vehicle for lower gear reduction
SPOA Sierra Diffs – Rear welded, front open
HYDRO ASSIST STEERING RAM – helps turn big tyres
DUAL BATTERIES – for winching
CHEQUER PLATE DOOR PANELS AND RACING SEATS
CUSTOM GAUGES AND STEERING WHEEL

NOT FITTED BUT TO GO WITH SALE 1 x Front Hilux Diff complete 4.88 centre 1 x Rear Bundera Diff complete 4.88 centre 1 x pair of 100 series front radius arms (was planning on coiling the rear with 3-link setup) 1 x pair of rear Hilux leaf springs (was planning on using these in the front) 1 x box of gas system components 1 x 20L custom fuel tank and factory Holley Carby (if you want to go back to petrol) 2 x Hilux driveshafts (for use when swapping to hilux diffs) The vehicle is sold unregistered, the plates on it are from my Pajero, just fitted so the truck doesn’t get a yellow sticker from council… Will need to be picked up on Car trailer or I can deliver to Sydney area for free or further as long as fuel money is covered.

PRICE: $3000 ono... will consider swap for another zook as this was going to be the missus's play truck but just dont have the cash to finish it.

[Daveluke]

Price drop $2000

[Daveluke]

May be willing to part it out of I get enough interest

[Daveluke]

PARTING IT OUT NOW PRICES BELOW, postage extra

DROVER BODY SINGLE CAB CHOP - $300
CUSTOM TRAY - $250
CUSTOM FRONT TUBE BAR - $500
9,000LB WINCH WITH STEEL CABLE - $200
HOLDEN 253 4.2L V8 with all gas and petrol bits + T700 and 1.3T/f- $600
REAR MOUNTED RADIATOR WITH TWIN THERMOS - $200
SPOA Sierra Diffs and leaf springs and shackles - $500
HYDRO ASSIST Setup - $300
1 x Front Hilux Diff complete 4.88 centre - $150
1 x Rear Bundera Diff complete 4.88 centre - $150
1 x pair of 100 series front radius arms - $50
1 x 20L custom fuel tank and factory Holley Carby - $100
2 x Hilux driveshafts - $50

[shiv]

I was checking this rig out on ebay awhile back.

Good Luck with the sales.

[Zook_Fan]

What powersteering pump and box are you running with the hydro assist setup?

[camo303]

Is it still together mate? Where in nsw?